Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5241852.

Revell Aqua Color bottle/pot organizer for 4, 6, 8, 10, 12 or 16 square pots

I needed a holder for a couple of pots of Revell Aqua Color that were flying around in my tool box. Printed in PLA @ 0.2 layer height, 60 mm/s, no supports, no frills ;-)
Choose from 4, 6, 8, 10, 12 or 16 pots. Enjoy. 

Please feel free to edit and use as you want. Don't forget to post a print if you do decide to use this.

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer or a coffee then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

Thank you

Revell Aqua Color bottle/pot organizer for 4, 6, 8, 10, 12 or 16 square pots

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5241869.

Based on the Z-Axis Knob for Creality Ender 3 by guppyk (great design by the way).
I included a direction arrow and text for up or down, just as a visual reference.
Two versions are included, one with an up logo & arrow and one with a down logo & arrow.
You may also want to use a bit of eclectrical/insulation tape to help afix to the z-rod.

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer or a coffee then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

Thank you

Z-Axis Direction Knob #1 for Creality Ender 3

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4470053.

These webcam arms are just two longer versions of the Logitech C270 mount by BKMorpheus (great design by the way). I needed more length because my webcam was too close to the bed on my Kossel Linear Plus, so I lengthened the arm and camera connector.

Included are a 100mm, 120mm and a 160mm length version of the arm and
a 30mm lengthened camera connector.

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer or a coffee then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

www.paypal.me/murdrrdbypirates

Thank you

Logitech C270 Mount Arm and Cam Connector Remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4710668.

This is a remix of the brilliant tool from <a href="https://www.thingiverse.com/howardb/designs" target="_blank"> HowardB</a>.
The only things changed from the original design are as follows:

1) A pencil storage hole for pencil with up to a diameter of 8mm.
2) A version has been added for 8x3mm magnets

Apart from that the original design has been kept. All credit goes to <a href="https://www.thingiverse.com/howardb/designs" target="_blank"> HowardB</a>, I only added things for my personal preferences.

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer or a coffee then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

www.paypal.me/murdrrdbypirates

Thank you

Rockler-Type Center-Offset Marking Tool Remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5241842.

This box is designed for notes from any note block with a size of 90 mm x 90 mm (9 cm x 9 cm - 3,54 inch x 3,54 inch). I originally designed it because i'm forever trying to recycle my old notes where i've only used one side. What happens when i rip them from the block and want to use them again? Yep, they fall behind the desk, the cat eats them or my wife throws them away because she hates my untidyness!!
You can either print the box in one piece (Zettelbox.stl) or if you want two different colours print it in 2 pieces (Zettelbox Top.stl and Zettelbox Bottom.stl). If you're going to use the 2 piece design be aware that there are no guide pegs etc. to line up top and bottom so you'll have to use a bit of glue and eyeball the final assembly - don't worry, it's easy....

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer or a coffee then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

Thank you

NOTE BLOCK HOLDER / ZETTELBOX - GOOD FOR RECYCLING YOUR OLD NOTES

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5198358.

This is a remix from the idea by jterranella (great idea by the way). I needed a bit of an angle (ca. 30°) to make the Pi and monitore case nice and straight (and even!) on my FLSUN SR. I also added some chamfers and rounded corners just to please my OCD ;-) !

I mounted the bracket to the extrusion using M5x12mm screws and t-nuts. The LCD was mounted to the bracket using M3x12mm screws.

In the photos you can see the Pi/LCD mounted permanently ;-) to my FLSUN SR.

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer or a coffee then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

www.paypal.me/murdrrdbypirates

Thank you

Raspberry Pi Official 7 Inch LCD 30° Mount/Bracket for 2020 Extrusions FLSUN SR

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5241862.

Corsair H100i V2 AIO Pipe/Hose Spacer and Separator

This is a remix of the brilliant customizable cable comb from <a href="https://www.thingiverse.com/marchogwyn/designs" target="_blank"> Phillip Poling</a>.
The only things changed from the original design are as follows:

1) The hose openings are the appropriate size for the 15-16mm hose diameter.
2) The height has been changed to 15mm to make the spacers beefier.
3) A Corsair logo has been added, so you can have with or without

Apart from that the original design has been kept. All credit goes to <a href="https://www.thingiverse.com/marchogwyn/designs" target="_blank"> Phillip Poling</a>, I only added and changed things for my personal preferences.

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer or a coffee then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

Thank you

Corsair H100i V2 AIO Pipe/Hose Spacer and Separator

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5241857.

All credit goes to <a href="https://www.thingiverse.com/OysteinHuse/about" target="_blank"> OysteinHuse</a> for his great design.

Printed @ 0.2 mm 10 % infill in PLA

Customized version of https://www.thingiverse.com/thing:2426065

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2426065

Printed @ 0.2 mm 10 % infill in PLA

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer or a coffee then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

Thank you

35ml Vallejo Bottle Organizer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4271954.

I designed this XYZ Axis/Plane helper for a friend (you know who you are Jack ;-) who always gets his 3D printing axis mixed up. Printed and mounted on, in front or beside the printer you always know which way's what! Two versions are included, one with and one without my logo.

See version 2.0 here: https://www.thingiverse.com/thing:4272292

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer or a coffee then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

www.paypal.me/murdrrdbypirates

Thank you

XYZ Axis/Plane Helper V1.0

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5241854.

For 17ml Vallejo paint bottles. All credit goes to <a href="https://www.thingiverse.com/OysteinHuse/about" target="_blank"> OysteinHuse</a> for his great design.

Printed @ 0.2 mm 10 % infill in PLA

Customized version of https://www.thingiverse.com/thing:2426065

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2426065

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer or a coffee then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

Thank you

17ml Vallejo Bottle Organizer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4272292.

This is version v2 with a bigger cube body. I designed this XYZ Axis/Plane helper for a friend (you know who you are Jack ;-) who always gets his 3D printing axis mixed up. I saw something similar on the internet a couple of years ago and decided to design my own. Printed and mounted on, in front or beside the printer you always know which way's what! Two versions are included, one with and one without my logo.

See version 1.0 here: https://www.thingiverse.com/thing:4271954

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer or a coffee then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

www.paypal.me/murdrrdbypirates

Thank you

XYZ Axis/Plane Helper V2.0

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5241880.

Based on the Blink XT2 Power Bracket by <a href="https://www.thingiverse.com/Walchek/about" target="_blank">Walchek</a> (great design by the way). Instead of hanging the sync module off a wall socket I just needed a bracket to mount to a wall or cupboard using screws or a piece of sticky backed velcro (you can probably use double sided tape or even blutack!?!).
I used the bracket without the holes, just because I didn't want to drill into my telephone/network cupboard.
Included in the files are a version with 4mm screw holes and one without.
Two versions are included, one with and one without my logo.

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer or a coffee then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

Thank you

Blink XT2 Sync Module Bracket with or without screws

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5241877.

Based on the Blink XT2 Power Bracket by Walchek (great design by the way).
Instead of hanging the sync module off a wall socket I just designed two side brackets to mount to a wall or cupboard using screws or a piece of sticky backed velcro (you can probably use double sided tape or even blutack!?!).
Included in the files are a version with 4mm screw holes and one without.
Two versions of each are included, one with and one without my logo.

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer or a coffee then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

Thank you

Blink XT2 Sync Module Bracket with side brackets

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5241872.

This is knob number 2 based on the Z-Axis Knob for Creality Ender 3.
I included a direction arrow and text for up or down, just as a visual reference.
Two versions are included, one with an up logo & arrow and one with a down logo & arrow.
You may also want to use a bit of eclectrical/insulation tape to help afix to the z-rod.

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer or a coffee then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

Thank you

Z-Axis Direction Knob #2 for Creality Ender 3

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4470694.

This is a remix from the idea by jterranella (great idea by the way). I needed a bit of an angle (ca. 10°) to stop the Pi and Case clashing with the PSU on my Kossel Linear Plus. I also added some chamfers and rounded corners just to please my OCD ;-)

I mounted the bracket to the extrusion using 5x12mm screws and t-nuts. The LCD was mounted to the bracket using 3x12mm screws.

Don't worry, the LCD is only mounted on an Ender 3 to show how it works... It's not mounted there permanently ;-) it's on my Kossel Linear Plus.

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer or a coffee then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

www.paypal.me/murdrrdbypirates

Thank you

Raspberry Pi Official 7 Inch LCD 10° Mount/Bracket for 2020 Extrusions REMIX

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5241859.

For 23ml Tamiya paint bottles. All credit goes to <a href="https://www.thingiverse.com/OysteinHuse/about" target="_blank"> OysteinHuse</a> for his great design.

Printed @ 0.2 mm 10 % infill in PLA

Customized version of https://www.thingiverse.com/thing:2426065

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2426065

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer or a coffee then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

Thank you

23ml Tamiya Bottle Organizer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5241849.

Dust Collection Adapter from 110mm to 100mm

This a dust collection adapter for attaching a hose to a collection system. The outside diameter 110mm to 100mm, a thickness of 4mm and is 140mm in length.

I printed it with 30% infill, it is strong enough for me. Please remember; the print take quite a while if you have a smaller nozzle, it took me almost 10 hours with a 0.4mm nozzle.

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

Thank you

Dust Collection Adapter from 110mm to 100mm

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4835048.

This a coarse sieve/filter for use behind a wood lathe or other tools attached to a dust collection system. The outside diameter of the sieve is 96mm and has a thickness of 4mm but can be scaled up in Cura for example if need be.

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer or a coffee then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

www.paypal.me/murdrrdbypirates

Thank you

Coarse Sieve/Filter for Dust Collection

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5241866.

I design this braiding star for my wife. She needed something to make a wool cord/braid for some bags.

Check out this YouTube video for a demonstration of use (wooden star) - even though it's in German it should give a visual aid to using the star:

https://youtu.be/ALxDj7S40u0

Remember to give my thing a "like", it´s very much appreciated :)

If you feel like buying me a bottle of beer or a coffee then donate through Paypal.
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank" img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" />
<a href="https://www.paypal.me/murdrrdbypirates" target="_blank"><img src="https://raw.githubusercontent.com/aha999/DonateButtons/master/Paypal.png" title="Donate with Paypal" /></a>

Thank you

Wool and thread braiding star Wolle und Garn Knüpfstern

My name is Jay, i'm a hobby maker, designer and self confessed 3D printing junkie. I'm an englishman living in Germany (for the last 29 years). Cheers, Jay.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

murdrrdbypirates

Achievements

Seedling

Trailblazer