Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5372150.

You need a table and all you have is a plate (it could be a book, shelf or something that you can find) and rods. (In my case it was a curtain rod and as a plate I used a glas that I use as a printing bed)
No problem, print this universalkit for a Portable Table.
The connector  and the feet can be change by another size.
You can remix it or ask me for the right size.
The first connector and feet size is for round rods with a diameter if 15~16mm.

All that you have to print is:
- 4x connector
- optional the test nut for the connector. Print it to check your print.
- 4x corner
- 4x foot (only if you need it)
- 8x nut (only 4x if you don't need the feet)

Print your Portable Table :D

If you like my work you can support me.
https://www.paypal.me/mikebayer3d

Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thangs](https://thangs.com/mrmbmrmb "Thangs")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")

Universalkit for a portable Table

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5371658.

A playable Nozzle for the boardgame Mensch ärgere dich nicht :D

Easy to print without support. You only need glue to glued the two parts together.

If you don't have a 3D printer you can ask me.
Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thangs](https://thangs.com/mrmbmrmb "Thangs")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")

Nozzle figures for Mensch ärgere Dich nicht

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5364468.

A simple smartphone stand. Easy to print without support.

If you don't have a 3D printer you can ask me.

Smartphone stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5352041.

R stand for Rabbit.
Decoration for eastern.

For this print you need:
- M3 Insert like this: https://www.aliexpress.com/item/4000232858343.html
- a short M3 screw
- optional a M3 nut if your screw to long or if your rabbit should a longer nose
- foam rubbers or something else for the ears

I sell on etsy a wooden variant with some adds.

R stands for Rabbit - decoration

I made a keychain with a hidden loop.
With a layer height of 0.2mm you should set up a pause at layer 38 and put the ring in.

I used this Keychain: https://www.aliexpress.com/item/1005003803735916.html

If you don't have a 3D printer, I sell it on Etsy: https://www.mikebayer3d.etsy.com

The original design is from DrLex
https://www.thingiverse.com/thing:2738211
https://github.com/DrLex0/print3D-FlexiRex

Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thingiverse](https://www.thingiverse.com/mrmbmrmb/designs "Thingiverse")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")

Flexi Rex Keychain with a hidden loop

I used 2 magnetics (6x3mm).
With a layer height of 0.2mm you should set up a pause at layer 19.

The last to parts of the slug are not movable because of the magnets.
The slug is 150% scaled because of the magnets.
You should print with less weight, for e.g. 0% infill and not more than 2 walls.

Magnetics that I used: https://www.aliexpress.com/item/32951137017.html?spm=a2g0o.cart.0.0.22783c00OsamVW&mp=1

If you don't have a 3D printer, I sell it on Etsy: https://www.mikebayer3d.etsy.com

The original design is from _Isaiah_
https://www.thingiverse.com/thing:4727448

Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thingiverse](https://www.thingiverse.com/mrmbmrmb/designs "Thingiverse")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")

Friendly Articulated Slug with hidden magnets

I made a keychain with a hidden loop.
With a layer height of 0.2mm you should set up a pause at layer 38 and put the ring in.

I used this Keychain: https://www.aliexpress.com/item/1005003803735916.html

If you don't have a 3D printer, I sell it on Etsy: https://www.mikebayer3d.etsy.com

The original design is from Artline_N
https://www.thingiverse.com/thing:2832177

Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thingiverse](https://www.thingiverse.com/mrmbmrmb/designs "Thingiverse")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")

Flexi Rabbit Keychain

I made a keychain with a hidden loop.
With a layer height of 0.2mm you should set up a pause at layer 38 and put the ring in.

I used this Keychain: https://www.aliexpress.com/item/1005003803735916.html

If you don't have a 3D printer, I sell it on Etsy: https://www.mikebayer3d.etsy.com

The original design is from Artline_N
https://www.thingiverse.com/thing:2832177

I used 6 magnetics (6x3mm).
With a layer height of 0.2mm you should set up a pause at layer 20 and 63.

Magnetics that I used: https://www.aliexpress.com/item/32951137017.html?spm=a2g0o.cart.0.0.22783c00OsamVW&mp=1

If you don't have a 3D printer, I sell it on Etsy: www.mikebayer3d.etsy.com

The original design is from Artline_N
https://www.thingiverse.com/thing:2832177

Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thingiverse](https://www.thingiverse.com/mrmbmrmb/designs "Thingiverse")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")

Flexi Rabbit with hidden magnets

Für die, die es nicht geschafft haben :'(

31.10.2021 Update Files for better printing results. v2 is better for FDM and the old one you can use for SLA.

Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thingiverse](https://www.thingiverse.com/mrmbmrmb/designs "Thingiverse")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")

Trostpreis Kürbiswettbewerb M+I

Ehrenpreis.stl

This little pumpkin has Nyctophobia D:

You can download the other parts of the original: https://www.thingiverse.com/thing:4974709

Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thingiverse](https://www.thingiverse.com/mrmbmrmb/designs "Thingiverse")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")

Twist Lock Small Scared Face Pumpkin

The cap of the water tank from my De'Longhi Dedica Style EC 685 was broken so I printed a new one. :-D

I made this with Fusion 360.

You can support me if you want:
https://www.paypal.me/mikebayer3d

Social Media
Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thangs](https://thangs.com/designer/mrmbmrmb "Thangs")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")



De'Longhi Dedica Style EC 680 and EC 685

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

mrmbmrmb

Achievements

Seedling

Fan Favorite