Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3669759.

This mod enables the mounting of a stepper motor and extruder directly to the x/y carraige of the Two Trees Sapphire S CoreXY printer, plus the brackets for an E3D V6 Hotend. The mod includes a remix of thing 3396264 by 2bedom, which is itself a remix of the MK3 R3 mounts.

This mod also includes components from :
https://www.thingiverse.com/thing:3249344 - Mk3 Nozzle by RH_Dreambox
https://www.thingiverse.com/thing:2758290 - BL Touch Mount by m3lvm

Features and changes include :

Enables stepper and extruder to be mounted directly above V6 hot end, to eliminate the poorly implemented original extruder/bowden configuration. Technically there still is a little bit of visible bowden between the extruder and hotend, but this is necessary to accommodate the frame.

Adds 20mm+ to the available Z build height by raising the hot end mount position, all other build dimensions remain the same.

Replacement of 5015 50mm fan with a 4020 40mm fan for part cooling - This fixes the issue of the 5015 fan colliding with the front right axis rod at the extreme of its travel.

Added cable support to extruder mount, to better support main wiring harness (requires zip tie)

Update 04/06/2019:
Added V2 of the extruder mounting bracket, which has improved strength and new cable management features to allow all cables (excluding thermistor and hot end power) to be constrained above the xy carriage rail, which reduces the possibility of any cables rubbing on the z axis screw.

Update 16/06/2019:
I have modified the nozzle to accept a vertical 5015 set 90 degrees to the v6 mount, this allows a 5015 fan to be used without compromising the build volume on the X axis. This change also includes a new fan support bracket. Using a 5015 fan delivers better part cooling air flow. (I will be the first to admit its not visually appealing, but it is functional and an improvement over the 4020 fan solution)

Two Trees Sapphire S Direct Drive & E3D V6 Hot End Mount (Prusa R3 Remix)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3788175.

E3d V6 Zesty Nimble Mount, with dual 5015 fans, adjustable surround part cooler, and BL Touch mount.

Features:

- No loss of x/y travel
- Z height gain > 15mm over original hot end mount
- Height adjustable surround cooler (remix of https://www.thingiverse.com/thing:2502178)
- Dual 5015 radial part cooling fans
- Adjustable BL Touch Mount

Requirements / BOM:

- Designed to work in conjunction with errs excellent XY motor mount mod (https://www.thingiverse.com/thing:3689256)

- Zesty Nimble (+ included fixtures)
- 2 x 5015 Radial Fans (24v)
- 1 x 4010 Fan (24v)
- 5 x M3 Square Nuts (https://www.amazon.co.uk/gp/product/B07D8T13XV/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1)
- 4 x 30mm M3 Bolts
- 2 x 25mm M3 Bolts
- 6 x 8mm M3 Bolts
- 5 x 10mm M3 Bolts
- 2 x 15mm M3 Bolts
- 8 x M3 Hex Nuts
- 1 x Bowden Tube (cut flush with top of zesty mount)

Optional :
- BL Touch
- Nema Extruder gimble mount (http://www.thingiverse.com/thing:3432097)

This thing is remixed from the following designs:
- Surround Cooler (https://www.thingiverse.com/thing:2502178)
- Ormerod 2 Adapter (https://www.thingiverse.com/thing:2473520)




Two Trees Sapphire S E3d V6 Zesty Nimble Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2286661.

Simple City side light design. Feet should just push into base, but you may need to resize hole/plugs depending on your printer.

Printed base and top at 0.20 layer height, feet at 0.35, all in PLA on i3 MK2.
I used normal opaque white PLA for the top part. It is very thin which acts as a good diffuser.

You will need to add bulb holder and plug / cable etc (I used ones from 2 cheap IKEA side lights which were £3 each)

Base : https://tinkercad.com/things/7SPKjmtI1Jk
Top : https://tinkercad.com/things/foZA7taXz7g
Feet : https://tinkercad.com/things/i0P5UGllAk3

City Side Light

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

mintytrebor

Achievements

Seedling

Two Trees Sapphire S Direct Drive & E3D V6 Hot End Mount (Prusa R3 Remix)

Two Trees Sapphire S E3d V6 Zesty Nimble Mount

City Side Light