King Kong - HueForge

This is a filament painting of King Kong. It was made by using Midjourney. Printed at 176x220 @ 1.84mm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PrintBed Black

Printbed White

PrintBed Gray

PrintBed Baja Blue

PrintBed Midnight Blue

PrintBed Cosmic Purple

Swap Instructions:

Black until layer #5 at 0.48mm Midnight Blue until layer #8 at 0.72mm Grey until layer #9 at 0.8mm Cosmic Purple until layer #11 at 0.96mm Baja Blue until layer #13 at 1.12mm White for the rest.