**_This design was made with you in mind :)_**

This 3D printable Christmas Ornament is a great memory piece to look back upon your wedding day! This could be a fabulous, easy, and cheap Christmas gift if you know their info :) 

**[Become a member](https://thangs.com/designer/mcinventiveproductions) to get the STL files and configured .3mf Bambu Studio File by selecting “Download All > Original”**
**Note:** If you are interested in a **commercial license** to sell prints of my designs, you must obtain the license by signing up for my **_Entrepreneur_** membership tier!

**Model Assembly**
Pretty simple for this one — print the print, tie on some string, and hang it on the tree for all to see! 

**Watch the associated reel showing the assembly on my instagram page [@mcinventiveproductions](https://www.instagram.com/mcinventiveproductions/)**

**Materials**
Bambu Lab Matte PLA (Charcoal) — [https://us.store.bambulab.com/](http://shrsl.com/2n5nn-2yn7-1cwx9)
Bambu Lab Matte PLA (Ice Blue) — [https://us.store.bambulab.com/](http://shrsl.com/2n5nn-2yn7-1cwx9)

**Print settings**
Material — PLA
Print orientation — as shown in slicer images on this post! 
Nozzle size: 0.4 mm
Layer Height: 0.08 mm Fine
Infill: 15%
Bed Size of my Printer: 256x256mm
\
P.S. The links above may be affiliate links which allow me to benefit financially from your purchase at **no extra cost to you!**

FirstDanceOrnament

recordOrnament.stl

**_This design was made with you in mind :)_**

These woven storage cups are perfect for holding desk accessories, being a table centerpiece, or being home decor! The model prints completely without supports and requires no special settings. These organic models will surely catch the eyes of anyone visiting your living space!

**[Become a member](https://thangs.com/designer/mcinventiveproductions) to get the STL files and configured .3mf Bambu Studio File by selecting “Download All > Original”**

**Note:** If you are interested in a **commercial license** to sell prints of my designs, you must obtain the license by signing up for my **_Entrepreneur_** membership tier!

**Model Assembly**
Pretty simple for this one — print the models without supports and display them for all to see! 

**Watch the associated reel showing the assembly on my instagram page [@mcinventiveproductions](https://www.instagram.com/mcinventiveproductions/)**

**Materials**
Polymaker Matte PLA (Beige) — https://amzn.to/3yHIkDL
OR
Bambu Lab Matte PLA (Latte Brown) — [https://us.store.bambulab.com/](http://shrsl.com/2n5nn-2yn7-1cwx9)
**Print settings**
Material — PLA
Print orientation — prints as it stands!
Nozzle size: 0.4 mm
Layer Height: 0.2mm Standard
Infill: 15%
Bed Size of my Printer: 256x256mm

Note: The model does not print perfect due to the small overhangs, but nothing that can’t be touched up with tools!
\
P.S. The links above may be affiliate links which allow me to benefit financially from your purchase at **no extra cost to you!**

WovenCups

woven_cups.3mf

Full Freedom to **UNLIMITED** downloads!

For **personal &amp; commercial use!** Includes a **commercial license** to sell the things you print! (the files themselves cannot be sold or shared)

**Select Annual billing for 25% off :)**

Entrepreneur

Full Freedom to **UNLIMITED** downloads!
 
For **personal printing only**; and does not include a commercial license to sell the things you print or the files you get! 

**Select Annual billing for 25% off :)**

Unlimited Personal

Print up to **7 models** on our page every month! 

This plan is for **personal printing only** and does not include a commercial license to sell the things you print or the files you get! 

**Select Annual billing for 25% off :)**

Personal

**_This design was made with you in mind :)_**

This rattan napkin holder is a fun little build that is perfect for turning your napkins into a decoration! The model prints completely without supports and can be assembled kind of like a lego kit!  
\
**[Become a member](https://thangs.com/designer/mcinventiveproductions) to get the STL files and configured .3mf Bambu Studio File by selecting “Download All > Original”**
**Note:** If you are interested in a **commercial license** to sell prints of my designs, you must obtain the license by signing up for my **_Entrepreneur_** membership tier!

**Model Assembly**
Pretty simple for this one — print the different colors on individual plates (can have multiple parts of same color), super glue the rattan arches in place, carefully snap the double-sided clips into place, and load your napkins! 

**Watch the associated reel showing the assembly on my instagram page [@mcinventiveproductions](https://www.instagram.com/mcinventiveproductions/)**

**Materials**
Polymaker Matte PLA (Beige) — https://amzn.to/3yHIkDL
eSun PLA (Light Khaki) — https://amzn.to/46Qu0Fw
Gorilla Super Glue — https://amzn.to/3YJHT6m 

**Print settings**
Material — PLA
Print orientation — as shown in slicer images on this post! 
Nozzle size: 0.4 mm
Layer Height: 0.12 mm 
Infill: 15%
Bed Size of my Printer: 256x256mm
\
P.S. The links above may be affiliate links which allow me to benefit financially from your purchase at **no extra cost to you!**

RattanNapkinHolder

rattan_napkin_holder.3mf

napkin_clip_final.stl

napkin_mainbody_final.stl

napkin_rattan_final.stl

**_This design was made with you in mind :)_**

This wavy-wave polaroid stand is perfect for displaying your favorite memories stored in the form of pictures! This model can stand on its own, or be hung on the wall. It holds 3 Polaroid pictures in total! 
\
**[Become a member](https://thangs.com/designer/mcinventiveproductions) to get the STL files and configured .3mf Bambu Studio File by selecting “Download All > Original”**

**Note:** If you are interested in a **commercial license** to sell prints of my designs, you must obtain the license by signing up for my **_Entrepreneur_** membership tier!

**Model Assembly**
Pretty simple for this one — print the model, load your favorite Polaroid pictures, and display them for all to see! This model can be stand-alone or can be mounted on the wall using nails/screws/command strips, etc! 

**Watch the associated reel showing the assembly on my instagram page [@mcinventiveproductions](https://www.instagram.com/mcinventiveproductions/)**

**Materials**
Polymaker Matte PLA (Beige) — https://amzn.to/3yHIkDL

**Print settings**
Material — PLA
Print orientation — prints as shown in the Bambu Studio images! Nozzle size: 0.4 mm
Layer Height: 0.2 mm 
Infill: 15%
Bed Size of my Printer: 256x256mm
\
P.S. The links above may be affiliate links which allow me to benefit financially from your purchase at **no extra cost to you!**

WavyPolaroidStand

WavyArchPolaroidStand.stl

WavyArchPolaroidStand.3mf

**_This design was made with you in mind :)_** 

Illuminate your space with this 3D printed A-frame cabin lamp, designed to bring the coziness of cabins into your living space. The model uses PLA filament in the colors of Matte Black & Matte Tan. The windows are printed using Bambu Lab Transluscent PETG. 

**[Become a member](https://thangs.com/designer/mcinventiveproductions) and get the .stl and the preconfigured .3mf Bambu Studio File by selecting “Download All > Original”**
Note: If you are interested in a commercial license to sell prints of my designs, you must obtain the license by signing up for my *_Entrepreneur_* membership tier!

**Model Assembly**
(1) Print all parts individually or group them together by color on your printer! 
(2) Layout all printed parts 
(3) **Watch the associated reel showing the assembly on my instagram page [@mcinventiveproductions](https://www.instagram.com/mcinventiveproductions/)!** 
(4) Assemble the A-Frame Cabin Lamp using super glue (be cautious of super glue touching your skin as it is an irritant!) 

**Materials**
PolyMaker PLA Pro (Black) : https://amzn.to/4fPP1oa
Bambu Lab Matte Tan : https://us.store.bambulab.com
Bambu Lab Transluscent PETG : https://us.store.bambulab.com
Gorilla Super Glue : https://amzn.to/3YJHT6m 
Bambu Lab LED Lamp Kit : https://us.store.bambulab.com

**Print settings**
Material — PLA
Print orientation — shown in images!
Nozzle size: 0.4 mm
Layer Height: 0.2 mm Standard
Infill: 15%
Bed Size of my Printer: 256x256mm
\
P.S. The links in this description may be affiliate links which allow me to benefit financially from your purchase at **no extra cost to you!**

A-FrameCabinLamp

AFrame_Lamp_Final.3mf

cabin_roof_final.stl

cabin_main_base.stl

cabin_small_back_window.stl

cabin_large_back_window.stl

cabin_door_glass.stl

cabin_large_back_window_frame.stl

cabin_door_frame.stl

cabin_front_framing.stl

cabin_deck(optional).stl

cabin_front_glass.stl

cabin_small_back_window_frame.stl

Modeling 3D printable home decor & practical household items that push the limits of 3D printing technology! 


Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

mcinventiveproductions

Achievements

Explorer

Fan Favorite

Sapling

Pinned models

RattanNapkinHolder

WavyPolaroidStand

A-FrameCabinLamp

FirstDanceOrnament

WovenCups