AllAll
Search scope
Upload for Search
AllAll
Search scope
Upload for Search
Chelsey K

Pooping Balloon Dog

by
ChelsCCT (ChelseyCreatesThings)
Follow
Follow
Remix Model
Social
maxmicah44
maxmicah44
|
|
Image 19 of 20
Pooping Balloon Dog - I used Lychee Slicer for this print and it was quite finicky. After a lot of trial and error these are the settings I settled on. I've attached my resin settings in the photos. I printed directly on the build plate so there was a slight elephant foot effect which I just sanded off. If I was going to print this again I'd increase the compensation on the burn in layers to .25. I've also attached a photo of the model in the slicer with the supports used, I recommend using quite a bit more supports as every single one of the connect areas sagged. Easily sanded to look much better but would have been easier if I set up more supports. I would avoid using supports on the torso of the body because they can be a pain to remove. Super happy with how it turned out. I airbrushed it with one layer of white all over and topped that with 2 layers of red and some gloss mod podge. Great model with minimal issues for this odd shape. Thanks! - 3d model
maxmicah44
maxmicah44
|
|
Image 19 of 20
Pooping Balloon Dog - I used Lychee Slicer for this print and it was quite finicky. After a lot of trial and error these are the settings I settled on. I've attached my resin settings in the photos. I printed directly on the build plate so there was a slight elephant foot effect which I just sanded off. If I was going to print this again I'd increase the compensation on the burn in layers to .25. I've also attached a photo of the model in the slicer with the supports used, I recommend using quite a bit more supports as every single one of the connect areas sagged. Easily sanded to look much better but would have been easier if I set up more supports. I would avoid using supports on the torso of the body because they can be a pain to remove. Super happy with how it turned out. I airbrushed it with one layer of white all over and topped that with 2 layers of red and some gloss mod podge. Great model with minimal issues for this odd shape. Thanks! - 3d model
2D
3D
Makes
Pooping Balloon Dog 3d model
Pooping Balloon Dog 3d model
Pooping Balloon Dog - PP Nebula rainbow, printed on Ender 3v2 - 3d model
Pooping Balloon Dog - Great file! - 3d model
Pooping Balloon Dog 3d model
Pooping Balloon Dog 3d model
Pooping Balloon Dog 3d model
Pooping Balloon Dog 3d model
Pooping Balloon Dog - CR-200b ABS - 3d model
Pooping Balloon Dog 3d model
Pooping Balloon Dog 3d model
Pooping Balloon Dog 3d model
Pooping Balloon Dog 3d model
Pooping Balloon Dog 3d model
Pooping Balloon Dog - very well designed model. had a good chuckle with some friends and family members (mother was not amused lol) - 3d model
Pooping Balloon Dog 3d model
Pooping Balloon Dog 3d model
Pooping Balloon Dog 3d model
Pooping Balloon Dog - I used Lychee Slicer for this print and it was quite finicky. After a lot of trial and error these are the settings I settled on. I've attached my resin settings in the photos. I printed directly on the build plate so there was a slight elephant foot effect which I just sanded off. If I was going to print this again I'd increase the compensation on the burn in layers to .25. I've also attached a photo of the model in the slicer with the supports used, I recommend using quite a bit more supports as every single one of the connect areas sagged. Easily sanded to look much better but would have been easier if I set up more supports. I would avoid using supports on the torso of the body because they can be a pain to remove. Super happy with how it turned out. I airbrushed it with one layer of white all over and topped that with 2 layers of red and some gloss mod podge. Great model with minimal issues for this odd shape. Thanks! - 3d model
Pooping Balloon Dog 3d model
This model is restricted by licensing terms. 
View license.

License: Attribution-NonCommercial-NoDerivs CC BY-NC-ND

Sculpt by @ChelsC423 A fun series of balloon animals I've always wanted to make! Hope you enjoy!

If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon

If you would like to support us and receive exclusive to Patron models every month check us out here: https://www.patreon.com/chaoscoretech

Categories:

Art
Other
,
Toys & Games
Other

Tags:

1.1K Likes5.1K DownloadsAugust 19, 2022
1.1K Likes5.1K DownloadsAugust 19, 2022
This model is restricted by licensing terms. 
View license.
TermsTerms & ConditionsSupportFeedbackReportReport ModelPrivacy