A knurled rim for your 'Tower' Airfryer timer Knob that has no grip whatsoever XD
Has a nice fit  not  too  tight must be printed in tpu though. 


Tower Airfryer Timer Rim

An addition to the  Gridfinity system by @zackfreedman 
This shelf i made up to use on the top of my ender 3 power supply. It supports either a  1x1 or 1x2 Gridfinity attachment.
No supports needed. version 3 now supports a solid 2x1 base.

Gridfinity Power ledge

An addition to the  Gridfinity system by @zackfreedman 
This shelf i made up yo use on the to of my ender 3 power supply. It supports either a  1x1 or 1x2 Gridfinity attachment.
No supports needed

Grifinity Power ledge

This model is designed to keep filament on the spool unwinding 
2 models include : 120mm is designed to guide the filament from the top portion of your spool and the 140mm can be used well if you filament feeds from the bottom.
I have this working with 
 https://www.thingiverse.com/thing:4853553
not sure if this would work with the standard holder.
I am currently using this  with my ender3 Max with direct drive and is working great so far. No supports ate needed however print the model with the filment feed flat on the bed 

filament spool guide 140mm.stl

filament_guide_spool_120mm.stl

~This top is part of a Christmas lithopane that can be created in itslitho.com.
Its litho settings can be found in the images to produce an amazing lithophane bauble.
I used a 1w led cob light that can be found on aliexpress
https://www.aliexpress.com/item/1005002310393752.html?spm=a2g0o.productlist.0.0.3ddb4e7aVt2YLo&algo_pvid=2ab40fed-d9da-4ed7-bfb2-c1984084c6f1&aem_p4p_detail=202111171056113236449001211850006390721&algo_exp_id=2ab40fed-d9da-4ed7-bfb2-c1984084c6f1-0&pdp_ext_f=%7B%22sku_id%22%3A%2212000020027152347%22%7D

and a double AAA battery pack
https://www.aliexpress.com/item/1005001482039265.html?spm=a2g0o.search0302.0.0.2a25781389siDK&algo_pvid=8d15e901-6a2c-4b08-8557-dcd88159ff7b&algo_exp_id=8d15e901-6a2c-4b08-8557-dcd88159ff7b-19~

The wire I used was just speaker wire.

Be sure when printing the litho its on a Raft and drop it a few layers to ensure good adhesion as the model that itslitho creates has a slight bezel round the rim.
 the second part is the battery clip which will work fine for the model linked above

I will share more photos soon 


Christmas Bauble lithophane top

baub wired top v1.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

matty.nurseus

Achievements

Seedling

Novice Maker

Voyager

Up and Coming

Tower Airfryer Timer Rim

Gridfinity Power ledge

filament spool guide 140mm.stl

Christmas Bauble lithophane top