Hi Button Friends! I've had so many requests for a seller badge, and in hopes to make something a bit unconventional and fun, I took way too much time to actually design it.

But at last, here it is as a giant clicker! The whole button requires 3 switches to build, and the finished piece mounts at an angle to prop up on your table at shows/fairs/cons.

Note on building: I recommend using 1 clicky switch in the upper-center slot and 2 linear switches in the lower slots. If you don't have any linear switches on hand, you can open Kailh clicky switches with two flathead screwdrivers and physically pull out the click bar with tweezers. This process will remove the "click" mechanism, resulting in a linear switch.

Two 3MF files are included, one for multicolor and one for single color printers.

I also created a set of PNG and GIF images with transparency for those of you who sell online. You can use these digital images to edit into your photos and/or display on your web shop. These are included in the download.

🎨 FILAMENTS USED • Polymaker Matte PLA - Army Blue (keycap frog lines) • Polymaker Matte PLA - Sakura (keycap, mount) • Polymaker Matte PLA - Watermelon (button base, bracket, mount lettering)

ℹ️ INFO • Requires 3 MX compatible switches. More info HERE.

⚙️ PRINT SETTINGS • Layer Height: 0.20 mm • Outer Wall Width: 0.35 to 0.40 mm • Wall Generator: Classic • Wall Count: 3 walls • Infill: 10% to 15% (gyroid or adaptive cubic)