Glove 80 Tenting Stabilizers

I designed these to make the tenting on my glove80 more stable.

Printing I printed in PLA, I had best results when I printed at 102% scale on X and Y. I also used a tree support of the bottom.

Assembly

• Place one of the nuts provided into either side. (The bolts help with this)
• Screw on one of the provide bolts through the stabilizer
• Add one of the black spacers provided to each side. (Optional on top)
• Make sure there is a grip on the side that will be at the bottom and tighten the stabilizer against it.
• Tighten the black spacer on the top against the stabilizer if you included it.
• Finally, screw them into place on the bottom of you keyboard.

I have also tried adding additional nuts or washers to make small adjustments, this may be advisable for others as the exact length of the stabilizers I use may not work for all. Also, feel free to remix this to the size you prefer!

My tenting setup 14.2mm stabilizer -- under palm rest 23.4mm stabilizer -- under the thumb buttons 15.6mm stabilizer -- under the top keys