What is the size? Dimensions: L 320 x H 215 x W 162 mm (excl. carrying handle) Volume: 11.2 liters.

What's the requirement to print this? A print surface of minimum 215 x 180 mm. Recommended: A machine that can handle PETG or other temperature-resistant filament.

PRINTABLE WITHOUT ANY SUPPORT MATERIAL

What parts can this case hold? ITX Motherboard 2, or 2.5-slot GPU up to 295mm long. SFX power supply A low profile CPU cooler up to 55mm Storage: Motherboard's onboard M.2 slots only 2x 120*15mm Slim PC fans

What's required to build this? 38 x M3 x 10 mm screws (HEX key head) 38 x M3 x 5.7 x OD 4.6 mm threaded brass inserts Ø12 mm power button C13 to C14 power extension at least 400mm long (must be angled, angle must match your PSU socket) 300mm PCIe riser cable with angled connector at the end Soldering iron Estimated filament use: 2 KG total (main body approx. 1,3kg / side panels approx. 700g)

Full written instructions can be found on Printables by clicking here.