Gengar Controller Stand

FREE FOR A LIMITED TIME!!! Only This Week. Download now and Like for more free models!

Gengar Pokemon Controller Stand

This is a controller stand/holder designed as Gengar from Pokemon. It is suitable for Xbox Series X Controller and PS4 Controller.

DO NOT change the size of model as this will impact on the controller slot and it won't hold it correctly anymore.

To get the best out of the STL file, please follow these guidelines: • Support is needed for his hands only. The spikes and everything else were designed carefully to be printed with support. • Layer Height: 0.2mm • Nozzle: 0.4mm • Recommended infill: 10% - 15%. • Recommended Infill Pattern: Gyroid or Cubic • Walls: 3 walls for better strength.

• Prepare and clean your bed for excellent adhesion. • Please, choose a printing speed your printer can handle and provide the best quality outputs. • Make sure your bed is correctly leveled. • Try to hide the seam and place it where nobody will pay attention (usually at the back). • Make sure your printing and bed temperatures are adequate for the filament you are about to use.

I appreciate your support by downloading and liking the design.

You can also share your feedback on my social media accounts:

Instagram: @maker_ibby TikTok: @maker_ibby Linktree: @maker_ibby