Widowmaker Drawer Feet Ender 6

These are modified bottoms for 2040 extrusion used in the widowmaker electronics drawer mod. I modified from here https://www.thingiverse.com/thing:3826077
and opened one side for room of the drawer t-nuts. I also shrunk the hole in the center to 6mm to work with the Voron feet

Printed in asa but anything else should be fine. 

Ender 6 Top and Bottom Ball Screw Mount

Ender 6 Top Ball screw mount.stl

Ender 6 DDX Chain Mounts

ender 6 front ddx chain mount.stl

Ender 6 Z axis Linear mount V3

This is a z axis linear rail mount for the Ender 6. I have added some supports for the bed rails to make the bed more sturdy than it currently is. It is also much easier to adjust the bed once you have everything lined up.

What you need:

T nuts: m3 - for the side of the bed rail
T nuts: m4 - for the top side of the bed rail
screws: m3-12mm x 8 - to connect to the linear rail carriages.
screws: m3-10mm x 2 - to connect to the bed rail and T nuts
screws: m4- 10mm x 2 - to connect to the bed rail and T nuts

Linear Rails: 2 carriages mgn12h 500mm rails

You will double the parts above to install the right and left side. Just duplicate the model for both sides.

I found removing the 2 screws under the bed that connects to the lead screw makes everything so much easier. also disconnect the bed heater and thermistor connectors. Before installing the rails I highly recommend cleaning and lubricating the carriages. you will need more t nuts and screws to connect the carriages to the frame. use the slot towards the front to put the rails on. once you put the mounts on the carriages and have your T nuts in place slide the bed in and make your adjustments as needed. once you have it dialed in put the 2 screws on the bed frame back in and tighten the 4 T nut screws on both sides to secure the bed frame. i secured the top first to adjust my pitch of the bed which brought up the front end more to make my bed more level.

Ender 6 Z axis Linear mount V2

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

magnavation

Achievements

Seedling

Debutant

Widowmaker Drawer Feet Ender 6

Ender 6 Top and Bottom Ball Screw Mount

Ender 6 DDX Chain Mounts

Ender 6 Z axis Linear mount V3