Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4376710.

Custom version of the Ultra Light Face Shield.  
https://www.thingiverse.com/thing:4284486  

Curved so that it can be attached to thick eyeglass frames.
We recommend using PETG because it is easy to break.

Face Shield Clips Curve

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4430310.

A tool for bundling cables so that they do not get entangled.

Cable Tie

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4577305.

Blind hook to put on the lattice.

Blind hook to put on the lattice

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4406560.

Custom version of the ELP Camera Module Mount.  
https://www.thingiverse.com/thing:3133056  
  
Ver2.5  
Go Pro mount compatible version.  

ELP-USBFHD05MT-KRL36 Camera Case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4633320.

Custom version of the Rubik's Cube Remixed by lowboydrvr.
https://www.thingiverse.com/thing:2640666

Center Remix V2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5161211.

Custom version of the Spool Holder.
https://www.thingiverse.com/thing:4141272

https://youtu.be/Z-ki-8r3wzQ

Dual spool holder Roller remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4615162.

Custom version of the Clip for fixing Ender's wires.
https://www.thingiverse.com/thing:3839232

Changed to a size that can hold the ribbon cable of raspberry pi camera.

Ender 3 Pi Camera Ribbon Cable Clip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5019203.

The original is published by TH3D Studio LLC.
https://github.com/th3dstudio/UnifiedFirmware/blob/2.0.x/STL%20Files/Gantry%20Leveling%20Block%20STL/GantryBlock%20-%20print%202.stl

In Ender3 it was changed to 12 cm.
Fits in the groove of the 4040 aluminum frame.

GantryBlock Ender3 remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4614289.

Link attached to the frame of Ender3.

Link attached to the frame of Ender 3

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4397995.

Clip for wiring the 5V power supply of the Raspberry Pi from the back side.  
Attach it to pins 4 and 6 as shown in the photo.  

Raspberry Pi Power Pin Clip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5155510.

Handycam HDR-TG5V holder for shooting desks from above.

Handycam HDR-TG5V and Station Desk shooting holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3981663.

Spacer for attaching [Pi camera](https://www.amazon.com/Raspberry-Pi-Camera-Module-Megapixel/dp/B01ER2SKFS) to [this camera mount](https://www.amazon.com/Camera-Platform-Anti-Vibration-Mount-servo/dp/B00FHRVI5C).  


Pi Camera Spacer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4554889.

Custom version of the Fabric Face Mask Clips.
https://www.thingiverse.com/thing:4496809

There are three improvements.

Ver1.0.0
- Resize the magnet mounting part so that DAISO's 13mm neodymium magnet, which is easily available in Japan, can be inserted.
- By making the magnet mounting part circular, you can add an angle.
- The joint between the magnet mounting part and the plate seemed to be weak, so I added a little thickness to the joint.

Ver1.0.1
- Improved to make it difficult to remove the string.
- The joint between the magnet mount and the plate seems to be weak, so I made the joint thicker.

Ver1.0.2
- By shortening the hook spacing, it is difficult for the mask string to come off.

3D Printed Magnet Ear Savers Parts Remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5146130.

Lite3DP
https://www.lite3dp.com/

Parts that fill the gaps in the LCD and prevent them from falling.

I am printing with a 0.4mm nozzle. Therefore, the wall is printed at 0.4 mm.
Please adjust the wall thickness by yourself. ;-)

https://youtu.be/5wsJYkypgbc

Lite3DP-S1 LCD frame

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4766671.

Parts to wrap around the stepper motor.No screws needed.
The CableChainEnd part is included as an example.
Please use for remix.

Composition of Ender 3 Pro in the photo.

Direct Drive prate
https://ja.aliexpress.com/item/4000401876482.html?spm=a2g0s.9042311.0.0.27424c4d2am1JT

Ender 3 X cover for Cable guides and camera mount
https://www.thingiverse.com/thing:4577307

Parts to wrap around the stepper motor

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5142557.

Lite3DP
https://www.lite3dp.com/

Parts for keeping the distance between the lead screw of Lite3DP-S1 and the linear guide rail constant.

https://youtu.be/5wsJYkypgbc

Lite3DP-S1 Lead Screw Stabilizer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5222270.

Custom version of the this Thing.
https://www.thingiverse.com/thing:4463383/files

Adapter made to fit direct drive kits for single gear extruders.
Recommended to make with PETG or ABS.

3D Printer MK8 Extruder Feeder Drive1.75mm Filament for Upgraded Right hand Extruder Ender 3 Pro 5/5 Plus/Pro CR-10 CR-10S
https://s.click.aliexpress.com/e/_ADQKFv

Ender-3 Aluminum Alloy Direct Drive Plate Upgrade Kit For CR10 Ender-3 Ender3 Direct Extruder Adapter Plate
https://s.click.aliexpress.com/e/_A9Se7Z


Direct Drive Plate Upgrade Kit / Single Gear Extruder Adaptor

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4627776.

Custom version of the Spool Holder for Ender 3 (Pro)
https://www.thingiverse.com/thing:3646853/remixes

Holder for small filament spools.
The diameter of the spool hole is assumed to be about 32 mm.

Spool Holder mini for Ender 3

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5329513.

ender 3 pro afterburner motor plate
https://www.thingiverse.com/thing:5026200

BL-Touch mounting parts of the above parts.
You need to use the M206 command to adjust the X coordinate offset.


\#define NOZZLE_TO_PROBE_OFFSET { -35, -1, 0 }


https://youtu.be/TXXIrh6Ajt4

BL-Touch ｍount

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

maceman001

Achievements

Seedling