Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6082078.

I recently came across the [pocket-dungeons](https://www.thingiverse.com/thing:59110) game published by Arian Croft (aka [dutchmogul](https://www.thingiverse.com/dutchmogul/designs)) on Thingiverse and wanted to create a storage case to keep all the pieces organized.  This design is the result.

The main box, lid, and the tray with the handle were printed with supports.  All other pieces were not.  

I kept the wooden textured side panels separate from the main box to make it easy to print them in a different color.

Note that I included a second logo with the title Dungeon Delvers.  I created this to go with a game set that I printed out at 150% scale for a friend with younger children. At that size the term "pocket" no longer seemed appropriate.

I also included a modified design for the tile trays designed to use less filament.

If you like this design I'd really appreciate it if you would please click the "like" link above.

Thanks & Happy Gaming!



Pocket Dungeons Storage Chest

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6123867.

This is a lamp box that I created with several different signs that can easily be swapped out for different occasions.  There is no fancy wiring or soldering required and all parts can be purchased from Amazon (I'll provide links to the parts I purchased below). 

The light bulb I used in the photos is a multi-color LED, but any standard C7 light bulb should work fine.  I printed this in PLA, so I used LED bulbs to minimize the risk of excessive heat deforming the printed pieces.

 I designed this at a fairly large size taking advantage of the large print bed on my Mingda Magician Max.  I included a set of the box parts scaled down to 90% of the original which should work better on most standard size printers.  The signs will need to be scaled to 90% when slicing if you chose to use the smaller lamp box.

The frame is held on the box using 6mm magnets.  These can be added during printing or glued in after.

Here are links to the purchased parts:

 - [Lamp Cord](https://www.amazon.com/gp/product/B09QCNLC76/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
 - [Light Bulbs](https://www.amazon.com/gp/product/B07WBVXYK8/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
 - [Magnets](https://www.amazon.com/gp/product/B07XRFLTLG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)

I plan to add additional signs in the future, so watch this design (or check back periodically) if you'd like to grab the latest.

If you like this design, please consider clicking the "like" link above to allow others to find this more easily.

Thanks & Enjoy!

Interchangeable Sign Light Box (Halloween, Party, Poker, etc.)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5740627.

This is a funko inspired set of small pieces that can be used to customize the robot design located here:

https://www.thingiverse.com/thing:3302911

The pieces should not need any modification to work with the robot design above at 100% scale. 

They were all printed with a filament change midway through the print to take advantage of multiple color filaments.

I've currently included designs for Batman, Batman Beyond, Superman, Spider-man, Ironman, Green Lantern Corps, and Blue Lantern Corps.

I plan to add more super hero designs in the future so check back periodically.  If you have suggestions for other super heroes that you'd like to see, please message me and I'll see what I can do.

**UPDATE (1-10-23):**  Added designs for Captain America, Batman the Animated Series, and a Classic Iron Man. 

Captain America's Shield was remixed from the design located here:
https://www.thingiverse.com/thing:3120257

**UPDATE (1-22-23):**  Added design for The Flash and an alternate Superman logo.

**UPDATE (2-25-23):**  Added designs for Yellow, Red, Orange, and Indigo Lantern Corps logos.

**NOTE:** If you like this design, please click the like link above.  Also, check out my Lego Classic Space Robots here:  https://www.thingiverse.com/thing:5784238



Super Hero Robots

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5541235.

This is an evolution of my original wedding table numbers located here: 
https://www.thingiverse.com/thing:5470492.  I've posted files for 15 tables in this design.

This version was modified to allow for two digit table numbers and leverages a background layer behind the number for some interesting effects.  In the photos posted, I'm using translucent black filament made by [Hatchbox](https://www.amazon.com/HATCHBOX-3D-Filament-Dimensional-Transparent/dp/B00M0CS1FC/ref=sxts_rp_s_2_0?content-id=amzn1.sym.c2391f3b-de31-4a45-9e55-8c469e899430%3Aamzn1.sym.c2391f3b-de31-4a45-9e55-8c469e899430&cv_ct_cx=hatchbox&keywords=hatchbox&linkCode=ll2&linkId=f798b0df863f056fa470f03a65697ff4&pd_rd_i=B00M0CS1FC&pd_rd_r=221d65e7-03da-404b-b7ed-927732545956&pd_rd_w=1KssB&pd_rd_wg=OSGuI&pf_rd_p=c2391f3b-de31-4a45-9e55-8c469e899430&pf_rd_r=KQAVPJEPA5C4Z1KDB9AN&psc=1&qid=1664590971&qu=eyJxc2MiOiI1LjU3IiwicXNhIjoiNC44NyIsInFzcCI6IjQuNDkifQ%3D%3D&sr=1-2-f0029781-b79b-4b60-9cb0-eeda4dea34d6) to allow for some lighting behind, but solid color filaments could also be used to match wedding theme colors.

I hope you like them.  Please share photos if you decide to use these… :)

UPDATE (3-22-23): Added an empty frame to allow for additional customization.

Wedding Table Numbers 2.0

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5470492.

A set of table numbers I designed for my daughter's wedding.

---------------------------------------------------------------------------------------------------------------------
Note: I've published an updated version of this design here to better support 2 digit table numbers:

 https://www.thingiverse.com/thing:5541235.  

The updated design has files for printing up to 15 table numbers.

--------------------------------------------------------------------------------------------------------------------

UPDATE (3-21-23):  Added an empty frame design to allow for easier modification.



Wedding Table Numbers

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5889982.

A custom set of Lego compatible blocks that will allow you to create walls that mimic the inside of the Death Star.

I created 2 sizes for different situations (a 2x4 block and a 2x3 at different heights).  Both are scaled such that they will integrate with standard size lego blocks as can be seen in the posted pictures.

I also included an option for a blank block along with stand alone wall faces to allow for different filament choices between the block and wall face.

This includes three different wall face designs - all remixed from the design by Freddy1990. 
The 2x3, and 2x4 brick designs posted by VLAD-MARIUS were also instrumental in creating these.

Special thanks to both of them for creating their earlier work.

Happy Building!







Star Wars Death Star Walls Lego Blocks

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5441815.

This is a design for an LED illuminated pedestal I created to display Lego helmet kits.  Lego has created a number of these as can be seen here:  https://www.lego.com/en-us/search?q=helmet

I currently own the Batman's cowl and Iron Man sets, and the pictures show how these look with the final product.

I designed this so that most parts can be printed without supports.   There's a hole in the front to snap in a logo to match the helmet being displayed along with two smaller holes for additional LEDs to illuminate the logo.   I'm using translucent filament for the parts I want to illuminate (the bottom, the lid, and some of the logo).  

I've included models for Batman, Ironman, and two Star Wars logos (one for the Empire, and one for the Rebellion) which should cover most of the helmet kits Lego makes.  The logo parts are the only ones I printed with supports.

The  LEDs were purchased from a company called [Briksmax](https://www.briksmax.com/search?q=RGB)  This company specializes in LED light kits that can be used to enhance Lego model sets, but they also sell individual lights in their DIY section for custom projects (They have a store on Amazon as well if you don't want to purchase from their website directly).  In the pictures, you can see I'm using their lighting kits for the helmets themselves. So, I just needed to add a couple of white LED strip lights for the base and white LED dot lights for the logos and wire them into the LED kit of the helmet.  If you're not using the helmet kit, you would need to add a usb power connector to the mix as well.  I've included a picture of the inside of the pedestal to show what the wiring looks like and make wiring easier.


LED Illuminated Pedestal for Lego Helmets

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5860313.

A 16x16 base plate with Star Wars cargo terrain to add detail when displaying mini-figures



Star Wars Lego 16x16 Base Plate

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5446580.

This is an evolution of an earlier design I created for a laser cut acrylic Halcyon Passport:  https://www.thingiverse.com/thing:5435718

This design was intended for a custom bounty hunter license card that can be purchased from the [KatrinsCuriosities](https://www.etsy.com/shop/KatrinsCuriosities?ref=simple-shop-header-name&listing_id=1182006276) store on Etsy, but should work for any of the ID cards available at that store.  I included a picture using this stand to display my Halcyon passport to show how that would look.  The link to purchase the bounty hunter license is:  https://www.etsy.com/listing/730553420/star-wars-bounty-hunter-licence?click_key=2f446c334f33e3024dccf518c3266105117b86a1%3A730553420&click_sum=c2afa5ed&ref=shop_home_recs_8.

The base and the lid were printed with 20% infill.  The logo pieces were printed with 50% infill.
The lid and logo parts were printed using supports.  The lid was printed upside down.

As with some of my other designs, the  LEDs were purchased from a company called [Briksmax](https://www.briksmax.com/search?q=RGB).  This company specializes in LED light kits that can be used to enhance Lego model sets, but they also sell individual lights in their DIY section for custom projects (They have a store on Amazon as well if you don't want to purchase from their website directly).


LED Display Stand for Acrylic Star Wars ID Cards

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5843845.

A simple box to store lego pieces and display small creations.

The inspiration for this came after completing the build of the Lego Back to the Future Delorean kit.  This kit has the option to build in one of three different configurations and I wanted a place to store the extra pieces with the build on display.

I liked the design so much, I created alternate Star Wars themed logos.  One for the Empire and another for the Jedi Order.

If you like these, please consider clicking the like link above.

Happy Building!


Lego Storage Box

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6008202.

Just in time for Star Wars Day - A light up display stand for a Mandalorian helmet.  

I used [this](https://www.thingiverse.com/thing:4961932) design for the helmet seen in the uploaded photos, but it should work with most of the designs out there.

The display stand was designed to hold the helmet printed at 87% scale (This was the optimal size for the location I plan to display this).  Be sure to scale the design up or down accordingly based on the size of the helmet you wish to display.

The box will need to be printed with supports to accommodate the holes for the logos.

The LED puck lighting used in the display can be purchased from Amazon here:

https://www.amazon.com/gp/product/B01N2I47VH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 



Mandalorian Helmet Display Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5784238.

Lego's recent release of of the Galaxy Explorer and Blacktron Cruiser was the inspiration for this design.

This is a set of small pieces that can be used to customize the robot design located here:

https://www.thingiverse.com/thing:3302911

The pieces should not need any modification to work with the robot design above at 100% scale.

**Note:** The helmet visor was remixed from this design: https://www.thingiverse.com/thing:170222

**Note:** If you like this design, please click the like link above.  Also, check out my super hero robots located here:
https://www.thingiverse.com/thing:5740627

Lego Classic Space Themed Robots

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5984837.

I designed this to work with the Kyber crystal display stand created by Ryan Pollard located on MyMiniFactory here:

https://www.myminifactory.com/object/3d-print-star-wars-disney-kyber-crystal-display-111089 

The design uses the two top crystal holders to display a total of 9 crystals.

Like several of my other designs, the LEDs used to illuminate this were purchased from a company called [Briksmax](https://www.briksmax.com/search?q=RGB).  This company specializes in LED light kits that can be used to enhance Lego model sets, but they also sell individual lights in their DIY section for custom projects (They have a store on Amazon as well if you don't want to purchase from their website directly).  

Star Wars Kyber Crystal Display with LED lighting

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5435718.

This is a design for a multi-color LED display stand for a custom made acrylic Halcyon passport from the KatrinsCuriosities store on Etsy (These were designed by the store owner to enhance the Star Wars Halcyon Star Tour experience at Disney theme parks, and looked awesome online.  The link to purchase one of these can be found here: https://www.etsy.com/listing/1182006276/star-wars-halcyon-passport?click_key=4b0692dde49943007f711cfeca78b04ec77aa913%3A1182006276&click_sum=e7c22740&ref=shop_home_recs_1&frs=1&crt=1)

I recently purchased one of these and needed to come up with a way to display it in my home office, which became the inspiration for this design.

The two main pieces of the stand were designed to be printed without supports.  As can be seen in the pictures, I included a place for a translucent Imperial logo that will also light up when the LEDs are turned on.

The multi-color LEDs were purchased from a company called [Briksmax](https://www.briksmax.com/search?q=RGB).  This company specializes in LED light kits that can be used to enhance Lego model sets, but they also sell individual lights in their DIY section for custom projects. (They have a store on Amazon as well if you don't want to purchase from their website directly.)  The parts I used in this design were the remote controlled RGB board, RGB strip lights,  USB power connector, and RGB connector cables. When pricing things out, I found it was cheaper to purchase the Lego Iron Man helmet kit (which has all the parts I needed and then some) than to buy the individual parts.   That kit can be found on Amazon here: https://www.amazon.com/BRIKSMAX-Led-Lighting-Iron-Helmet/dp/B096TT5W4K?ref_=ast_sto_dp


LED Halcyon Passport Display Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5422777.

A simple tray to hold stacks of the hexagon shaped poker chips I designed in my Star Wars Themed Poker Set: https://www.thingiverse.com/thing:5418190

Designs for the chips shown in the photos can be found in the link above.

Resizing the design along the x axis (in the direction the chips are stacked) will allow you to control the amount of chips the tray can hold.

Please note these trays were designed to work with the hexagon shaped chips I created.  This will not work with ordinary circular poker chips.


Chip Tray For Star Wars Themed Poker Chips

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5538516.

A pedestal I created to hold a battery powered  tea light for one of the little ghosts created by Narnaa Gracewind and posted here:

https://www.thingiverse.com/thing:5522464

This was designed to work with little-ghost-v2 printed at 300% scale.

The battery powered tea lights in the images can be purchased from Amazon here: 

https://www.amazon.com/dp/B07PLYFYJP?psc=1&ref=ppx_yo2ov_dt_b_product_details


Tea Light Pedestal for Little Ghost

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5438955.

A simple pedestal for displaying a Batman Popvinyl figurine.

The print shown in the images was printed with the logo on the top to allow for a color change filament swap on single extruder printer.  

I designed this with a small cavity on the bottom to allow for the placement of 2 way tape to keep the pedestal in place.  I ended up using supports for this with the orientation I chose to print (with the logo on top), in order to facilitate the color change I mentioned above, but they probably weren't needed. 

Batman Popvinyl Pedestal

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

maandren

Achievements

Seedling

Debutant

Novice Maker

Voyager