Designed using TinkerCad
My daughter is an avid MTG player. There are a couple of dice boxes on Thingiverse but I couldn't find one that was a standard six sided one.
So here they are!
There are 3 designs. (see the pics) One 50mm square die with holes for 6x3mm magnets One 100mm die with holes for 6x3mm magnets One 100mm die with holes for 8x3mm magnets
There are pips for both 100mm & 50mm die. Just print 21 of the size needed and a dot of crazy glue.
It takes 8 magnets, 4 for the top and 4 for the bottom.
I bought some really good ones and a pack of 200 decent ones. Both work great, but I do like the black or gold ones! Just a tiny dot of glue in the hole and press the magnet in.
Pack of 200 https://smile.amazon.com/dp/B07KZQGWNN/ref=cm_sw_em_r_mt_dp_PPQ3PP66FGF1C2XDSSMT
Pack of 60 Gold or Black rare earth Neodymium https://smile.amazon.com/dp/B00HA2LM30/ref=cm_sw_em_r_mt_dp_NHWC7FCVFSSD5V1R8YMC
I used PLA No supports needed. Print hole side facing up. 10% to 20% infill .2 layer height I printed at 70mm speed on my Ender 3 Pro
I hope you enjoy!
Jeff