#throwback
M2 / 2.5 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 on the front with screws

M16 M20 M24 on the back
It could measure screws length from 4 to 70 mm.
Updated 09/06/2024: Corrected misalignments from the first version

Original version I've remixed (Metric_screw_measuring_device_Mod.stl) is from [Thingiverse](https://www.thingiverse.com/thing:5167503)

Metric screw measuring device M2-M12(M16-M20-M24) 70mm #throwback

Metric_System_Screw_measure v37.stl

Originally posted by Caiqart on Cults3d (but no more available!)

Very awesome Kratos Bust from God of War Ragnarok videogame!

Print it 0.16mm - 0.12 mm resolution, using supports as needed.
Compose the parts by joining them and eventually using glue.

Kratos Bust - God of War Ragnarok

Head.stl

Check also my other model Luigi, both [Whole version](https://than.gs/m/1094770) and [Assembly version](https://than.gs/m/1062500)

Finally, here he is!

Remixed from Cults by BPITANGA

Better to print it standing on his feet, using supports.

I have also created a version that needs to be glued and assembled [here on Thangs](https://than.gs/m/1061185)
Let me know if you have any questions.

Mario from Super Mario videogames (Whole Version)

Whole_Mario_v35.stl


Check also my other model Mario, both [Whole version](https://than.gs/m/1096664) and [Assembly version](https://than.gs/m/1061185)

This is whole figurine version, for which I've also added a base


Luigi from Super Mario videogames (Whole Version)

luigi entier.stl

Just a simpler version of metric system screw from my other model with nut holes on the back
M2 / 2.5 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 on the front with screws and just a simple clean and blank side on the back

As usual, it could measure screws length from 4 to 70 mm.


Simpler metric screw measuring device M2-M12 (Empty back side) - 70mm

Metric_System_Screw_measure v38_blank_back_side.stl

Simple Assembly for RPi Camera HQ

You just need:

- **_Support Camera_** + **_Protection Camera_** for mounting on your RPI HQ Camera
- One or more **_Arm Straight v4_** (different lengths available) to structure the actual arm
- **_M5_knob_short_v4_** (one for each Arm) to combine with M5 Screws & Nuts
- (Optionally) One or more _**Axis_change_connector_v3**_ to pivot your assembly on a different axis
- Base + 3 Legs to support the assembly and keep it steady


I've taken pieces from these models

[Modular Base for Modular Phone Mounting System](https://www.thingiverse.com/thing:2767323)

[Modular Mounting System - Arm Straight V4](https://www.thingiverse.com/thing:3689842)

[RPI HQ Camera support](https://www.thingiverse.com/thing:4541773)

[Modular Mounting System](https://www.thingiverse.com/thing:2194278)

Raspberry Pi Camera HQ Arm Mount

support_camera_hq.stl

Reuploaded from [Thingiverse](https://www.thingiverse.com/thing:2364430) by [ykratter](https://cults3d.com/en/users/ykratter)

This Hedgehog will gladly guard your Flash ,SD and Micro SDs
20% infill

I'm particularly fond to this model, since it is one of the first objects I've ever printed in my life.
Originally printed with my SLA printer (i.e. grey one in the photos), but it can be printed also on FDM printers (i.e. yellow one from the OP), maybe with a bit of support on the touching bed contact points.

FlashHog - USB & SD Holder

FlashHogSpikes01.stl

It originates from this [other model of mine on Thangs](https://than.gs/m/1071087)

M2 / 2.5 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 on the front with screw holes

On the back there are hex slots to measure M2 - M12 nuts with corresponding size

It could measure screws length from 4 to 70 mm.

**How to print (these are my specific Ultimaker Cura settings in 3mf project)**
- 0.12 mm layer height
- 1 wall/perimeter count
- 15-20% infill
- slow print speed (50-80 mm/s) and slower speed on initial layers for better adhesion
- support (approx. 1 mm) for overhanging hex nut slots


Screw & Nuts Measuring Device M2 - M12 70 mm

Metric_System_Screw_measure v36.stl


M2 / 2.5 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 on the front with screws 

M16 M20 M24 on the back
It could measure screws length from 4 to 70 mm.
**Updated 09/06/2024:** Corrected misalignments from the first version

Original version I've remixed (Metric_screw_measuring_device_Mod.stl) is from [Thingiverse](https://www.thingiverse.com/thing:5167503)


Metric screw measuring device M2-M12(M16-M20-M24) 70mm

Metric_screw_measuring_device_Mod.stl

Simple Spool Clip Filament
I've also uploaded a x20 Clip version

Reuploaded from model at [Thingiverse](https://www.thingiverse.com/thing:1635106) by [mc0676](https://www.thingiverse.com/mc0676)

Universal Spool Clip (Filament 1.75 mm)

clip.stl

Reuploaded from [Thingiverse ](https://www.thingiverse.com/thing:4479366) by [Prot0typ1cal](https://www.thingiverse.com/Prot0typ1cal)

Simple shelf mount headphone hanger

3 body sizes available for shelf/desk thickness:

12-25mm / 1/2 - 1"
25-38mm / 1" - 1-1/2"
38-51mm / 1-1/2 - 2"
Personally printed parts in PETG for strength

Yet Another Headphone Hanger

Hanger_Body_25-38.STL

Remixed from [Cults](https://cults3d.com/en/3d-model/game/luigi-grogro) by [GROGRO](https://cults3d.com/en/users/grogro)

Check also my other model Mario, both [Whole version](https://than.gs/m/1096664) and [Assembly version](https://than.gs/m/1061185)

With his green cap and superb moustache, this luigi is completely normal, but still incredible!

Multicolor print!

Update 04/01/2024: Remixed adding a simple base for Luigi's figurine (both figurine versions)

Luigi multicolored, to be printed with several parts that should be assembled and glued

Luigi from Super Mario videogames (Assembly version)

Arm (Right).stl

Body (middle).stl

Body.stl

Button.stl

Cap (circle).stl

Cap (L).stl

Cap.stl

Eye (Left).stl

Eye (Right).stl

Eyebrow (Left).stl

Eyebrow (Right).stl

Hair.stl

Hand (Left).stl

Hand (Right).stl

Mustache.stl

Shoe (Left).stl

Shoe (Right).stl

Check also my other model Luigi, both [Whole version](https://than.gs/m/1094770) and [Assembly version](https://than.gs/m/1062500)


Finally, here he is! This is a multi-color print. Print each part in the right color and glue afterwards.

There is no need to paint anything.
Remixed from [Cults](https://cults3d.com/en/3d-model/game/mario-from-mario-games-multi-color) by [BPITANGA](https://cults3d.com/en/users/bpitanga)

The model is 11 cm high.
This is mostly support free. Some pieces (both halves of the suit), will require a bit of support, but they are sparse and do not affect the aesthetics of the part.
When assembling the face pieces, the last part to be glued must be the nose.

I have also created a [whole version](https://than.gs/m/1096664)

Let me know if you have any questions.

lollo1188

Achievements

Sapling

Explorer

Fan Favorite

Pinned models

Mario from Super Mario videogames (Assembly Version)

Luigi from Super Mario videogames (Assembly version)

Metric screw measuring device M2-M12(M16-M20-M24) 70mm

Mario from Super Mario videogames (Whole Version)

Metric screw measuring device M2-M12(M16-M20-M24) 70mm #throwback

Kratos Bust - God of War Ragnarok

Mario from Super Mario videogames (Whole Version)

Luigi from Super Mario videogames (Whole Version)

Simpler metric screw measuring device M2-M12 (Empty back side) - 70mm

Raspberry Pi Camera HQ Arm Mount

FlashHog - USB & SD Holder

Screw & Nuts Measuring Device M2 - M12 70 mm

Metric screw measuring device M2-M12(M16-M20-M24) 70mm

Universal Spool Clip (Filament 1.75 mm)

Yet Another Headphone Hanger

Luigi from Super Mario videogames (Assembly version)

Mario from Super Mario videogames (Assembly Version)