This is the two arms  and the swivel  base for the guitar tuner for the CT-30 instrument tuner.
I used a small picture hanging nail for the replacement of the pivot axel. you could use a small 2mm screw or bolt.

DeltaLabs CT-30 Tuner  Clip and Swivel

tunerclipleg2 v1.stl

This is a replacement foot for the Coleman instastart Skillet. Mine Melted off so I designed a new one and printed a set out of PETG for testing, I also added some kapton tape to between the foot and the metal base of the skillet. I also noticed that the heat spreader was bent down in a few places to I tweaked that a bit to try and stop the heat going into the base as much.

I printed with 30% infill and not supports you can probably get away with lower infill.

coleman skillet replacement foot

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4791325.

EDIT: this fits better with a 40x40x10


This mounts a 40x40x10Noctua fan on an angle so it can be used with the original back plate and house a 24v-12v buck convertor with a cooling slot for the convertor.

I printed this on a snapmaker a350



Snapmaker PSU Fan 40x40x10

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5261915.

I have remixed a few different  things to make this 1 being the monitor stand by ProtoMoshhttps://www.thingiverse.com/thing:197906

and the swivel vesa 100x100 mount by Ramjet

https://www.thingiverse.com/thing:3291160

Monitor Stand 3 Legs

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4904700.

Designed up this dealer button to use in home games or have just as something laying around for any poker fan.  It was inspired by a dealer button in Pokerstars VR.

Printing:

Ring - Infil to add weight, supports needed for spade inset.  Letter embossing doesn't need it.
Spade - Infil to add weight, no supports
Letters - Print flat, already scaled to fit nicely in the embossing
Star - Infil to add weight.

Full print with 4x4x4 walls/top/bottom and 38% infil came to about 48g in weight.  

Glue in lettering and spade.  Star may need minor sanding but should push fit into the space tightly and not need anything else to secure it.

Dust Separator for small black series car Vacum

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5255788.

This is the clip for a 05 tacoma xrunner headlight to grill clip.

this is printed with supports at .24 

2005 Tacoma headlight grill clip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4136249.

This is the belt clamp and sensor mount for the migbot i3 it, relocates the sqaure prox sensor towards the x endstop to clear the frame when the extruder is doing bed leveling at the max travel for x. 

It also helps to make the stock zprob more accurate by allowing you to get it squared to the bed

This worked amazingly well. 

Pictures to come. 

Extended ProxSensor mount for Migbot i3

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

lethario

Achievements

Seedling

DeltaLabs CT-30 Tuner Clip and Swivel