Designed to friction fit the ubox 80v on the top left corner of the controller box, leaving room for the AvaSpark RGB Gen 2 controller.

Need to remove the top left stud on the stock GT controller box for this to work. Use a large drill bit to slowly work into the stud, then switch to a oscillating tool, sanding machine, or dremel to smooth it out.

Recommended to print in PETG (PLA is probably ok too), and some M3 screws and inserts.

GT Ubox 80v Holder

gt ubox 80v holder base.stl

Putting this on a stock GT will brick your board. Only compatible with GTV!

Recommended to print in TPU.

GT VESC Rail Badge

vesc gt badge v3.stl

Kush Wide is designed to be compatible with Flight Fins, but if you don't ride fins, and ride with your back foot scraping the tire, the cutout might get uncomfortable. This piece is designed to fill in the gap while matching to the concave profile of the Kush Wide.

Recommended to print in TPU upside down. Duplicate and flip the model to get both sides. Recommended to use the short bang bumper screws. Don't use long screws on the footpad!

Not tested for the Kush Lo and Hi, but probably will fit as well.

Onewheel XR Kush Wide Flight Fins Cutout Delete

xr_kush_delete.stl

Protect your charge port with a diode. These things get hot! To prevent melting the rest of the components in your controller box, wrap your diode in thermal pad and press it onto your heatsink with a diode holder.

Fits up to 4 100V5A Schottky diode. Fits stock XR controller box (top right stud), or DIY builds (bring your own stud).

Recommended to print in PETG, but PLA should probably also be fine.

https://www.amazon.com/SQXBK-Silicone-Schottky-Barrier-Rectifier/dp/B09Y1YD17L/ref=sr_1_4?crid=3TP4FJIJZT0NC&keywords=100v5a+diode&qid=1703644375&s=industrial&sprefix=100v5a+diod%2Cindustrial%2C70&sr=1-4

Diode Holder

diode holder.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

leonchangpersonal

Achievements

Seedling

Explorer

GT Ubox 80v Holder

GT VESC Rail Badge

Onewheel XR Kush Wide Flight Fins Cutout Delete

Diode Holder