Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3299578.

I just took the stp file and mess with it for a bit, modified stp files are included for further messing if you're interested.

Two versions included, 40 deg and 60 deg.

Didn't really care too much about license but it sounds like a remix automatically inherit from its source, thus same GNU-GPL.

##Below is body of text copied from the source page.
---

##Please use the tag "sourcetwo" when uploading files to thingiverse.com
#The idea
The SOURCE TWO is a collaborative open source frame project initiated by Team BlackSheep, targeted at FPV racers. It follows the footsteps of SOURCE ONE, a FPV freestyle frame.

The frame design is donated to the community to empower creators and makers, and integrate best practices and current trends faster into a continuously manufactured product. It's a cheaper alternative to clones that can be bought with the peace of mind that the big brands of the FPV industry stand for.

#Project links
Project discussion: https://discordapp.com/invite/ZJGkHwF
Project files: https://github.com/ps915/source_two
3D-printed accessories: https://www.thingiverse.com/tag:sourcetwo

#Project license
The frame files are released under GNU Public License (GPL) V3. More information here: https://www.gnu.org/licenses/gpl-3.0.en.html

#Project naming requirements
SOURCE TWO is the name of the frame. If you are thinking about manufacturing it, you are expected to prefix the name with a brand name in order to allow customers to distinguish the different manufacturers, e.g. “TBS SOURCE TWO”. As a manufacturer you are also expected to denote the version number of the frame files that you have placed as basis of the project, e.g. “TBS SOURCE TWO V0.1”. If you have forked the project, you need to give it another name in order to avoid confusion between SOURCE TWO and your project. Accessories from the SOURCE TWO project also need to be named with the entire prefix, e.g. “TBS SOURCE TWO FPV Camera Adapter”. Unless the file is not compatible with certain versions of the frame, the compatible version number or version range also needs to be included in the name, e.g. “TBS SOURCE TWO FPV Camera Adapter V0.1 - V2”

SOURCE TWO V0.1 - GoPro Session Mount (40/60 deg)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3396068.

(Yet) Another Dremel prop cutting tool, designed to cater prop/duct proximity requirements for Shendrones Squirt quadcopter frame.

No moving parts to virtually eliminate tolerance / backlash issues.

Pick a hole, use 5mm drill bit, or standoff from your Squirt frame kit as prop shaft.

3rd hole from the right is 1.5" radius for 3", + and - holes are bigger and smaller radiuses in 0.125mm increments. 

2 versions of the tool included to fit different milling bit sizes - most common ones like 3mm or 3/32"

Fusion 360 design file included for ease of modifications.

**Updates:**

**20200626:** V17 - Standoff holes enlarged to 5.4mm for easier insertion/removal, some cosmetic/QoL changes.

**20190329:** V12 - 3mm bit ONLY, rightmost hole for 3", all holes to the left are in 0.25mm smaller radius increments. Design file is not included since it's just some parameter change, plus I encourage users to mess with original design files to their liking.

Approximate 3" Prop Cutter for Squirt / Cinewhoop

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2861770.

####Dummy 3D model for designing FPV frames and accessories.

#####<=== Please consider buying me a beer if you find this useful, cheers :)

####Size and measurements are approximate estimation based on internet images, use at your own risk.
####STL file is just here as required by Thingiverse, I intentionally messed up its size and is not intended to be printed. Please convert the step file if you really need to print the model.

#####Update 26 Apr 2018 - Right side screw hole missing in original file, replaced with fixed version.

Runcam Micro Swift 3 DUMMY

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3869959.

###ATTENTION: THIS THING IS UNTESTED
---
Modified version, for use with Pro Mag 9mm Colt SMG Adapter in standard forged AR15 lower.

Please refer to original .223/5.56 version for print and hardware info.

**Update 23 Sep 19:** V01 - Modified dimensions, added a 9mm marking on left side.

AR 15 Magwell - Pro Mag 9mm Colt SMG Adapter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2594557.

# 2.5" Micro Quad Frame

My early design, inspired by a few other frames on the market with my own twist - Dead Cat  style.

### Design features:
- 109mm motor to motor, 2.5" prop size
- 11xx motor pattern (Ø9mm M2)
- 3mm carbon fiber main frame with skinny arms
- 1.5mm carbon fiber top plate
- For flight controller & 4-in-1 ESCs with 20x20mm mounting hole pattern

### Updates:
- **27 Jan 2018**
 - Added new camera mount to accommodate a generic 600 TVL camera and an Eachine VTX03 **30 degrees and more secure**

### Updates:
- **2 Nov 2017**
 - Added new camera mount to accommodate a generic 600 TVL camera and an Eachine VTX03 **20 degrees**

### BOM
- Printed / CNC'd parts from file in **this page**.
- 20x20mm FC/ESC tower with suitable hardware (M3 mounting holes on frame, M3-M2 spacer can be printed.)
- 110x motors
- Micro receiver
- Micro AIO VTX (VM275T) or [600 TVL Camera](https://www.banggood.com/600TVL-1_8mm-14-CMOS-120-Degree-Wide-Angle-Lens-FPV-Camera-PALNTSC-3_7-5V-p-1092333.html) + [VTX03](https://www.banggood.com/Eachine-VTX03-Super-Mini-5_8G-72CH-025mW50mw200mW-Switchable-FPV-Transmitter-p-1114206.html)
- (2) M3x30mm nylon screw
- (2) M3x6mm nylon screw
- (1) M3x20mm nylon standoff
- (2) M3 nut
- (Optional) [WS2812B LED](https://www.banggood.com/50Pcs-DC-5V-3MM-x-10MM-WS2812B-SMD-LED-Board-Built-in-IC-WS2812-p-963382.html) with 5mm LED on 10mm dia. round PCB

https://www.youtube.com/watch?v=JaIbDGfJ_Ik

### Don't have CNC router? Carbon fiber parts available on [Armattan Productions](https://armattanproductions.com/pages/kit_detail/1332).

KRD DC109 2.5" Quad Frame

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2509328.

#Shooter ready, stand by......
----
**Did I help your reloads? I would appreciate a beer or two lol ↑↑↑**

####Huge ass flared magwell for AR15/M4 rifles, designed for competitve environment where crazy accessories are cool, even cooler if it helps your reloads.

###Features:
- Flared magwell in a funnel shape for **easier magazine insertion**.
- Approx. **200% opening area** compared to normal magwell.
- 5 degree lower angle to prevent collision to your fingers if you use "beer can grip".
- Cutout section to accommodate aftermarket trigger guards.
- **Fits most magazines**...... probably, test and verify before use! (Nope, no drums.)
- For use with **forged style AR15 lower receiver**, modeled after actual AR-15 firearm lower receiver, will fit airsoft rifle if the receiver size is same as real ones (Pictured above).




**Note:**
**2x M3x5mm grub screws required for this magwell to secure, which WILL scratch and/or mar your receiver.**

###Don't have a printer? This is also available on my [Shapeways Store](https://www.shapeways.com/product/E4DHGQGS2/krd-ar15-magwell) in SLS / MJF Nylon materials.


AR 15 Magwell

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2687934.

###3D Printed Accessories for [**KRD HD3 Quad Frame**](https://rotorbuilds.com/build/8891)

#### Print parts in **TPU**:
- (4) Protector (Check your bridge setting, print slow at slightly lower temp with cooling fan **ON**)
- (2) Cam Spacer (You will want the **1mm** spacer at **0.9mm** thick due to tolerance reason, print in **0.15 or 0.1mm** layer height)
- 30.5x30.5mm FC spacer

###Get the frame [HERE](https://armattanproductions.com/pages/designer_shop_grid/6334/1846)

KRD HD3 Accessories

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4483283.

###Propeller guard for Shendrones Squirt V2
----
- Guard-only, **non-duct design** for **reduced ground effect / wind resistance**.
- **78mm** inner diameter to accommodate **3 inch props**.
- Trimmed front edge to stay out of frame of your GoPro footage.

STL is flipped upside down as the optimal printing orientation.
Designed for printing with **TPU**.
**Support** is required.
Same file for both sides, just print 2.

Prop Guard for Shendrones Squirt V2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2368369.

It's high noon......
-----

.

.

.

Wanted a bigger LCD knob with multiple recesses for spinning around, without having to "aim" every time.
Adding a center one for pressing, with these requirements the design naturally became a revolver cylinder shaped knob, cheers.

.

.

.

Draw!
=====

Revolver Knob for Prusa i3

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4105026.

#Make bed level correction easier and quicker!
-----
##Optimized for Original Prusa printers.
-----
##(Mostly)Parametric Fusion 360 design file included
-----


###Procedure: (Assuming you cleared EEPROM and have to start over)
- Run XYZ Calibration
- Meanwhile slice all 4 STLs with your general settings
- Run First Layer Calibration to achieve basic adhesion
- Print **Live Z.stl**, observe bottom face and adjust Live Z, repeat until desirable bottom surface finish is achieved
- Repeat with **Front_Back.stl**, please note L shaped indicator points to the *front* of the machine, adjust Bed Level Correction.
- Repeat with **Left_Right.stl**, this time indicator is on the *left* side and is also pointing to the front.
- Finally print **Whole Bed.stl** to confirm and compare all bottom finish of all squares.



Bed Level Correction Assistant

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4701439.

This will create a flange of 100mm diameter and 2mm thick, to allow using aftermarket ear pads on Philips SHP 9500 headphones.

Philips SHP9500 Pad Adapter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2937451.

Printed the Immortal-T Mount for a friend.
He asked if this can be made without the space to act as landing feet, so I modified the model and printed for him.

FlosStyle Landing Feet

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

kwongkan

Achievements

Seedling