Monstera Leaf Shaped Jewelry Tray, Jewelry Plate, Jewelry Storage Tray, Jewelry Holder, Household Creative Jewelry Storage Ornament
Hey! It seems like lots of people are having trouble making my models fuse together properly. If you're facing this issue and tweaking your printer settings isn't helping, I might have a solution for you. I've been playing with Cura slicer software and found something interesting: while in vase mode, it seems to print the top and bottom layers twice, for some reason. Nobody really knows why, but guess what? For me, this turned out to be a good thing! So, if you're struggling with your lines fusing together, give Cura slicer version 4.13 a try. Good luck, Ivan!
**Print settings:
0,6 mm nozzle - 1.6 mm line width x 0.5 mm height
0,8 mm nozzle - 1.5 mm line width x 0.5 mm height
1 mm nozzle - 1.4 mm line width x 1 mm height
Vase mode
0 bottom layers
25 mm/s speed
for Orca/Bambu/Prusa
Set the slice gap closing radius to 0.001
P.S. If your lines didn't merge together, try scaling the model to 98% and so on.**