tracking pixel
Andrew N

Radahn 200x200.stl

by
k3football123
Follow
Follow
Remix Model
k3football123
k3football123
Image 1 of 2
Radahn 200x200.stl 3d model
2D
3D
Makes
Radahn 200x200.stl 3d model
Radahn 200x200.stl 3d model
This model is restricted by licensing terms. 
0 Likes3 DownloadsJuly 6, 2024
This model is restricted by licensing terms. 


Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite Orange Transmission Distance: 7.5 This print uses 3 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #14 (1.2mm) swap to Orange for the rest.


0 Likes3 DownloadsJuly 6, 2024




This model is restricted by licensing terms. 
0 Likes3 DownloadsJuly 6, 2024
This model is restricted by licensing terms.