Clamp plug (Part PX1716039) for the Shop Fox Aluma-Classic table saw fence. This is a wear part and needs replacement periodically.

Print long side down with organic supports for the upper prongs for best strength. I printed it in PETG with a .6 nozzle, 4 perimeters, and .2mm layer height.

Shop Fox Aluma-Classic Fence Clamp Plug

Aluma_Classic_Clamp_Plug.stl

Baseplate to use the Bauer 20v trim router to flush trim edge banding with a flat cutter and extra support for using edge profile bits.
The large hole on the rounded end takes an M8x10 heat set insert for a handle with an M8 thread (the one in the picture comes from a Seneca Domiplate).

Vertical Edge Banding Baseplate for Bauer 20v Trim Router

Baseplate.stl

Adapter to more easily fit the Festool D36 hose to the older OF 1010 with the oval dust fitting.

Print in TPU with a .6mm nozzle and 2 walls.

Festool D36 to OF 1010 Dust Adapter

Gridfinity holders for Cricut blades. A 1x1 block holds just a single tool, while 1x2 blocks hold the tool head and replacement blades or quick-swap ends.


Gridfinity Cricut Blade Holders

Gridfinity_Cricut_Blade_Holder_Bridge.stl

Gridfinity modules for the HF Pittsburgh ratcheting screwdriver set. Separate blocks for the handle, bits, and SAE / Metric sockets.

Gridfinity Pittsburgh 34 piece Ratcheting Screwdriver holder

HF_Ratchet_Screwdriver_Metric.stl

Vertical holder for the Harbor Freight 6in1 screwdriver set.

Gridfinity Harbor Freight 6in1 Driver

Gridfinity holder for Cricut pick, tweezers, spatula, and scraper.

Gridfinity Cricut Accessories Holder

Basic Gridfinity holder for the Harbor Freight feeler gauge.

Gridfinity Harbor Freight Feeler Gauge Holder

Gridfinity blocks to organize sewing thread spools.

The spool blocks are based around the Günterman 100m/250m/500m spools, most other brands I had laying around are similar diameters but slightly shorter and still fit.

The bobbin blocks fit ø 20mm x 11.5 mm  bobbins for Janome machines, if your machine takes a larger bobbin it probably won't fit.

- 6 x ø 20mm spools (100 meters) in a 2x3 block
- 2 x ø 30mm spools (500 meters, smaller 250 meter spools also fit well) in a 1x3
- 3 bobbins in a 1x1 block.
- 9 bobbins in a 1x2 block. 50% denser than the 1x1 block but harder to remove from, so I only use this one for empties.


Gridfinity Thread Storage

Gridfinity_Thread_Storage_2x3_100m.stl

Another Gridfinity pen holder, this one specifically sized for Cricut machine pens.

Gridfinity Cricut Pen Holder

2x2x3 stackable Gridfinity holder for common 4-piece (#6, #8, #10, and #12) countersink sets.

Gridfinity Countersink Set Holder

Holder for a [Neiko right-angle ratcheting screwdriver](https://smile.amazon.com/gp/product/B000XYOUS6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1) and 8 bits.

Gridfinity Ratchet Screwdriver Holder

HF_RightAngleRatchetScrewdriver.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

jrsunday

Achievements

Trailblazer

Seedling

Fan Favorite