Created in Solidworks holds a G6, portrait or landscape. Designed with a hole for charging in portrait mode, with a cutout for the charging cable to go out the back. The tray is 15mm deep to fit some protective covers. I use an 90 degree USB C 3.1 adapter to eliminate stress on the charging cable, but it can be used without one. Here is a link to an adapter.
https://www.amazon.com/dp/B07XZ1TSJS?psc=1&ref=ppx_yo2_dt_b_product_details


Touchpad Stand 2.STL

Created in Solidworks holds a G6, portrait or landscape. Designed with a hole for charging in portrait mode, with a cutout for the charging cable to go out the back. The tray is 15mm deep to fit some protective covers. I use an 90 degree USB C 3.1 adapter to eliminate stress on the charging cable, but it can be used without one. Here is a link to an adapter.
https://www.amazon.com/dp/B07XZ1TSJS?psc=1&ref=ppx_yo2_dt_b_product_details
I uploaded two versions in 3mf and stl formats

Touchpad_Stand_3.STL

I designed these stands in Solidworks to put my WiFi Modem and External drive on, then I decided to make them stack-able with pins to hold them in place. These were printed at 125% (231mm X 231mm X 122mm) and should be able to be printed much larger depending on the printer. To be printed top down and pins should be printed flat side down
Printed with on Tenlog D3 Pro, .4 nozzle, 4 walls, 9 top/ bottom layers 30% infill, Hatchbox Black PLA 

Stackable Stands

Middle Stand.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4813997.

This remix has been a year in making, I ran out of the Black Haze PTEG I was printing with and there was no more to be available, then I was put  12 hour shifts, so it got put on the back burner. I added threading to the upper and lower hilts so it wouldn't need to be glued I trimmed down lower part of the emitter and designed a "switch" that is pressure fitted over that end of the emitter so it looks more like Rey's Light Saber. I printed the Emitter at 102% because the with Amazon Basic PETG I used it was too tight, and the switch was printed to fit. The top retainer helps keep the triangles on the emitter from falling out, super glue works on the PLA version I printed. I'm still looking for a good PETG glue, what I used on my original make of SparkBibo's design didn't hold and I had to "weld" the upper and lower hilts together a with soldering iron and filament. Which is why I started this remix in the first place, so I could make it without glue.The only part that needs support is the end cap, no rafts needed, I did use brims.
Added display a stand on 4/3/21 
Added screw heads to emitter for looks, adjusted diameter of the switch, added a second choice for the end cap 4/4/21 
The blades are from 3DPRINTINGWORLDS  fine Collapsing Light Saber
https://www.thingiverse.com/make:696545
Thanks to SparkBibo and 3DPRINTINGWORLD for their great designs.
These are the flashlights I use.
https://www.amazon.com/gp/product/B07N2NBVTZ/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

Rey's Light Saber Remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5190898.

 I used Meshmixer and 123D, to hollow it out and make a hole in the bottom to put the LED light into. CR10s Pro modified to direct drive, 3 walls, .6 nozzle, 0 infill, 9 top and bottom layers 1.5 retraction, printed at 190% of original stl, using ISANMATE green glow in the dark PLA.
Link for the light. https://www.amazon.com/gp/product/B07V1DLGCR/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
This link is direct to Loftek web site 
https://www.loftek.us/collections/led-accessories

Gnome Light - Remix

External Drive Rack for 2.5in  HDDs
Made in Solidworks 2020
Drive Bay Dimensions 30mm X 100mm X 130mm
Holds a WD Black Game Drive with 10mm X 3 to spare
Print with back on bed so no supports will be needed

External Drive Tower

External Drive Tower 3.STL

Some Boxes I made in Fusion 360. Printed in Pearl PLA and Black, Emerald and Red TPU. So no supports are needed the top is printed separately then glued  

Chamfered Boxes

Box v1.stl

SV04 Filament Runout Sensor Mount, both mounts have been printed and tested.
Remix of Zigma51's Filament Run Out Sensor Mount
https://www.thingiverse.com/thing:4946032

SV04 Filament Runout Sensor Mount

SV04 Runout Sensor Mount v1.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

johnlava1957