The best way to spread Christmas cheer is disturbing re-interpretations of odd traditions!
(eh, to each their own, I guess)

I didn't like the idea of kissing beneath a toad. And honestly, adding a toe warhead to a missile was much less disturbing than adding missile fins to a toe, to me.

The toe should friction-fit (and maybe a bit toit) to the missile, and if you print them in appropriate color filaments, your sweetie will refuse to kiss you beneath it, just like mine.

Missile can be printed at whatever low-res you like. I used a .2mm layer height and 10% infill. Toe was printed at .2mm and 50% infill just to add weight to make it balance when hanging. 10% would work too, not sure how it'd affect the balance.

Both were printed with a brim and no supports.

filaments pictured are:
https://www.amazon.com/dp/B07D29Y5VJ
and
https://www.amazon.com/dp/B07V4QQC5S

If you got a giggle out of this oddity, drop a comment and say so. And take a holiday greeting of your choice:
Happy Hanukkah, Magnificent Festivus, Merry Christmas, Happy Kwanzaa, Geez it's cold out there eh?

disclaimer: To be completely honest... I found both the toe and the missile elsewhere, and honestly don't remember where. But if you're the one who made the toe or the missile I modified here, thank you. They were fantastic. Mostly. I had to mod the missile because your dang fins were poorly attached. And now I'm combining both here for glorious effect.

Don't print this and sell it. Print it and give it away. It's Christmas, dammit.

Missile-Toe

missile-toe-TOE.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4856680.

I wanted the stowable pi cam mount on my printer, but the Voxelab Aquila is a clone of an Ender 3 V2, not an exact copy -- the Aquila x-axis mount gives the original Stowaway Pi Cam for Ender 3 ( https://www.thingiverse.com/thing:3426025 ) nowhere to clip on.

This mount for the Aquila goes on top of the X-axis cover, using the cover bolt to make the mount secure.  This requires a longer bolt -- I stole one from the display mount.

Room for improvement: Rotate the mount so the long arm is down by default.  Rework the connection from the bolt face to the mount face - it doesn't need to be this wide then curve back to a smaller mount face.  Hole out some of the mount face (the side the arm comes out of). It'll reduce material and print time needed, and be just as strong.  Go on.  Do it.

If you like this, change it, hate it, wish my hair was a different color, whatever... comment. :)


Voxelab Aquila X-Axis Mount for Stowaway Pi Cam

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

jbdaddy556

Missile-Toe

Voxelab Aquila X-Axis Mount for Stowaway Pi Cam