It's a large rock on a ring. Mens size 9. scale to your ring size as needed.

The Rock Ring

Make this necklace by 3D printing on fabric, the perfect carrier for conductive wire, LED sequins, and a coin-cell battery. 
Design Execution by Billie Ruben’s amazing guide on 3D printing on fabric- linked here https://www.billieruben.info/post/guide-3d-printing-onto-fabric 
which was originally developed by David Shorey (https://twitter.com/shoreydesigns/status/1086859466971086848)

Imgur step-by-step guide linked here for how to 3D print on fabric (from my Shang Chi floating ring design): https://imgur.com/a/9oWUNpg

For the LEDs wiring and such, follow the next guide for the conductive wire and LED sequins:
https://learn.adafruit.com/adafruit-led-sequins/sewing-with-conductive-thread
more specific guide on wiring coming on imgur soon!

This design is a submission to the "HalloWearables Design Contest With Zack Freedman"

#HalloWearable #HalloWearables


Floating LED Star Necklace (3D print on Fabric, e-textiles)

Harness the Mandarin’s Ten Rings, on a floating necklace

Printed in Gold Silk PLA, printed on Black Tulle Fabric from Walmart (5 usd), and spare string 

Inspired by Marvel’s Shang Chi
Design Execution by Billie Ruben’s amazing guide on 3D printing on fabric- linked here https://www.billieruben.info/post/guide-3d-printing-onto-fabric 
which was originally developed by David Shorey (https://twitter.com/shoreydesigns/status/1086859466971086848)

Instructions are simple - the big picture workflow is:
1) Print your PLA normally for the first 3-5 first layers
3) Pausing print manually or in gcode at the 3-5th layer
2) lay down your fabric (can be Tulle, net, or organza), and secure it with binder clips OR in my personal favorite, using neodymium magnets (on prusa steel sheets!)
3) resume printing after that and the fabric will be "encased" by the plastic!

The following guide is adapted from Billie Ruben's guide in Cura (which needed custom gcode weirdness). Prusa Slicer makes adding in pauses/change filaments much easier. https://imgur.com/a/9oWUNpg

This design is a submission to the "HalloWearables Design Contest With Zack Freedman"

#HalloWearable #HalloWearables

Floating Ten Rings Necklace (3D print on fabric)

Harness the Mandarin’s Ten Rings, on a floating necklace

Printed in Gold Silk PLA, printed on Black Tulle Fabric from Walmart (5 usd), and spare string 

Inspired by Marvel’s Shang Chi
Design Execution by Billie Ruben’s amazing guide on 3D printing on fabric- linked here https://www.billieruben.info/post/guide-3d-printing-onto-fabric 
which was originally developed by David Shorey (https://twitter.com/shoreydesigns/status/1086859466971086848)

Instructions are simple - the big picture workflow is:
1) Print your PLA normally for the first 3-5 first layers
3) Pausing print manually or in gcode at the 3-5th layer
2) lay down your fabric (can be Tulle, net, or organza), and secure it with binder clips OR in my personal favorite, using neodymium magnets (on prusa steel sheets!)
3) resume printing after that and the fabric will be "encased" by the plastic!

The following guide is adapted from Billie Ruben's guide in Cura (which needed custom gcode weirdness). Prusa Slicer makes adding in pauses/change filaments much easier. https://imgur.com/a/9oWUNpg

Floating Ten Rings

Some 3D Printed feet for your PC case rising needs. insert 1/2" 6-32 inch screws thru the heel of the "foot" to secure the feet to your pc. 

on a more serious note, check out some of my other mods that help with getting your gpu cables out the bottom of the case:

https://imgur.com/a/8wqfzbL

https://www.etsy.com/shop/3DPCbyJay

PC Case Feet ("Human Foot!")

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

jaysonjehsen

The Rock Ring

Floating LED Star Necklace (3D print on Fabric, e-textiles)

Floating Ten Rings Necklace (3D print on fabric)

PC Case Feet ("Human Foot!")