Used to install a 6 1/2" speaker bracket in a 5th generation Subaru Sambar. Jig fits into a hole in the door and the bracket fits over the jig to perfectly center the bracket. The crosshairs on the jig allow you to measure the center of the speaker so that you can use a 6 1/2" hole saw to drill the door card. The file for the bracket that I used is included below.

https://www.thingiverse.com/thing:4538826

Speaker Centering Jig.3mf

Two piece mount for the STI accelerator pedal consisting of an ABS piece to attach to the STI pedal and a TPU piece to go over the stock pedal and mount. Insert the ABS mount through the hole in the TPU sock and then attach the STI pedal to the mount with a 30mm long m5 bolt and nut. 

I also included versions without the mount hole to be used on their own as a pedal cover. There is a smooth version as well as a ribbed version.

Sambar STI Pedal Mount

Pedal Mount - Sock V2.3mf

Dash insert to allow you to mount a fog light switch in the removable dash inserts in a Subaru Sambar. I used a wiring harness off Amazon and removed the holding clips from the switch to allow me to fit the printed part around it.

Sambar Fog Light Dash Insert.3mf

Fog Light Dash Insert - Blank.3mf

Made two different versions of the key cover. The Open top version is designed to allow you to slip the key through the top. Recommended to print his model vertically to avoid long bridges. 

The closed model is designed to be paused prior to the top portion of the print, and for the key to be placed inside. I printed with outside, inside, infill settings, thick bridges, and ironing of the topmost layer. You may need to mess with your settings a bit in order to get a quality you are satisfied with.

I printed both models with TPU, although the closed model could likely be printed with a harder material such as ABS since it doesn't require flexibility to insert the key.

Subaru Sambar Key Cover

Subaru Sambar Key Cover - Closed.3mf

Radio bezel for a 5th generation Subaru Sambar. Allows installation of double din radio without altering the factory bracket. Designed to fit snugly around Sony AX3250 and may not work with all radios.

Sambar Double DIN - Sony Radios.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

james.a.buckley92

Speaker Centering Jig.3mf

Sambar STI Pedal Mount

Sambar Fog Light Dash Insert.3mf

Subaru Sambar Key Cover

Sambar Double DIN - Sony Radios.3mf