Please, could you tell me the relationship between pinion diameter and crown diameter? Could you also inform the eccentricity relationship between the center of the rotor and the motor shaft?
This isn't really an air-powered engine. It's more of a CO2 powered engine (Obviously). I suggest you use Andrew (3dprintedlife)'s design and revise it to make it better.
I went back and spent 2 hours trying to figure out how to use f360 I made a disassembled version of this, there is one part i missed on the housing but the support structure residue can be sanded away. Here's the design : https://www.thingiverse.com/thing:5463682
Discussions — Liquid Piston Engine
Do you print this in one part?
Do you print this in one part?
Do you print this in one part?
Do you print this in one part?
Please, could you tell me the relationship between pinion diameter and crown diameter? Could you also inform the eccentricity relationship between the center of the rotor and the motor shaft?
This isnt the one from the video is it?
This isn't really an air-powered engine. It's more of a CO2 powered engine (Obviously). I suggest you use Andrew (3dprintedlife)'s design and revise it to make it better.
I went back and spent 2 hours trying to figure out how to use f360 I made a disassembled version of this, there is one part i missed on the housing but the support structure residue can be sanded away. Here's the design : https://www.thingiverse.com/thing:5463682
here's a revised version 1.5 weeks later : https://www.thingiverse.com/thing:5477856
no works
https://www.thingiverse.com/thing:5477856
same
Can you post .stl files
https://www.thingiverse.com/thing:5477856
open it in fusion 360 or whatever cad software you use and the save as mesh or stl
meshmixer
why is it a .step file? neither Cura or Creality slicers can open it
https://www.thingiverse.com/thing:5477856
what software should I use to separate the parts into printable portions?
meshmixer