remix of the ultimate spool holder https://www.thingiverse.com/thing:2047554
Didn't like the way the press fit was made, so I remade it to be a sort of checker board fit, added stabilizing feet, and made it a bit taller to better fit around the spool sides.
Needs four 608 bearings (rollerskate bearings)
You need to print this model four times for a full set.

spool holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4298210.

Hook shaped like a cat head with paws.
Should print without supports just fine.
Has a hole in back for nail or screw hanging.

Cat hook hanger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3980079.

Small poster holder using rolling pin wedge principle, so we have gravity working for us.
After printing wiggle the roller a bit  so breaks free and is able to roll freely inside the housing.
I used the tip of a ballpoint pen to nudge the roller free.
For mounting I used some generic tack putty. Let me know if you want me to design a version with holes for nails or pins.
Do not use supports!
(also ignore the giant creases on my poster. It was used to test the viability of my design :P )
Update: added a version with bumps on the inside for those people who are having trouble getting the roller to grip properly.

Poster holder 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3763984.

Garage for miniature wargaming.
Remixed so it has hinges for easy assembly and disassembly.
Layer height is at your discression. Usually I go for 0,2mm on terrain
It is recommended to print the parts standing up, so a brim or raft bed adhesion is advised.
Enabling supports for the hinges are also a good idea. If you can, it is a good idea to disable support in the area of the garage door, on the front wall, since it will not do much for quality and is a hassle to remove and clean properly.

Garage storage unit building for wargaming

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2553712.

Simple shelf bearers. I ran out of the usual ones and made the simplest ones I could imagine.

angle shelf bears

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4920570.

Simple clothes hanger that folds together.
Useful for when you have a blouse or a dress, and you don't want to stretch out the neck fabric to get the clothes hanger in.

snaps together snuggly. Should be easy to fold out, but shouldn't easily fall out of the hole when clothing is on the hanger.

Fits on a 200x200 mm buildplate

Foldable Clothes Hanger

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3989667.

Hexagonal poster holder, for that futuristic look.
After printing slide a ruler or credit card through the slit to free the ball.
When mounting make sure the ball falls down so it can wedge between the poster paper and the back of the mount.
If you are having trouble getting it to grip you can lift out the bottom part of the mount a little bit away from the wall, so the ball falls a little lower and is jammed tight when you let go of the mount.
I used putty for adhesive on the wall.
Let me know if you want a version with holes for nails or pins.

Poster holder hex shape

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2455088.

Console objective marker for Infinity the game (sci-fi miniature skirmish tabletop wargame)
You glue the satellite dish on the spike on top. It should fit nice and snug.

Data terminal for Infinity the game

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

imonsei

Achievements

Seedling

Debutant