tracking pixel
I

Leap_Motion_20mm_Tube_Mount.STL

by
iamthewouf
Follow
Follow
Remix Model
I
iamthewouf
|
Image 3 of 3
Leap_Motion_20mm_Tube_Mount.STL 3d model
I
iamthewouf
|
Image 3 of 3
Leap_Motion_20mm_Tube_Mount.STL 3d model
2D
3D
Makes
Leap_Motion_20mm_Tube_Mount.STL 3d model
Leap_Motion_20mm_Tube_Mount.STL 3d model
Leap_Motion_20mm_Tube_Mount.STL 3d model
This model is restricted by licensing terms. 

A mount for the Leap Motion Camera designed for attaching to tubular support structures with 20-21mm diameters. Attachment to the tubular support is done via standard hose clamps (ideally 8mm wide) running through the curved groove in the camera mount. Cutouts on either side allow the USB connector to be placed on either side of the mount, supporting both possible camera orientations.

Printed in PLA with the following settings (see also preview image): 20% triangular infill (not that important as infill is minimal) 0.2mm Layer height 6 solid top layers, 4 bottom layers 3 perimeters with supports

Requires approx. 1.5h print time and 15.26g of material


0 Likes2 DownloadsSeptember 5, 2022


0 Likes2 DownloadsSeptember 5, 2022
This model is restricted by licensing terms.