Multigrid Bin Label Plate
37 downloads · 2 years ago · A plate to clip into a 1 unit wide Multigrid bin to place a printed label on. Additionally it makes
A plate to clip into a 1 unit wide Multigrid bin to place a printed label on. Additionally it makes it easier to grab a bin surrounded by other bins. It uses the Rim Lock holes and the notch for fixation. To give it more hold, it could make sense to add some glue but holding is very good even without it. As the notch seems not to be symetrical, there is an L on the lower side of the plate.
Multigrid Bin Label Plate
37 downloads · 2 years ago in and
.png&w=3840&q=75)
Remix 1x1x0.75 - No Lock Holes - ramped - Labelplate - Multigrid Bin
Gridfinity Bin Covers, Mid Plates, and Top Plates
Decorative 1x1x0.25, No Lock Holes, Multigrid Bin - Daboo
Remix of 4x2x0·25, No Lock Holes, Multigrid Bin w/ push-fit
Remix of 3x1x0·25, No Lock Holes, Multigrid Bin w/ push-fit
Remix of 2x1x0·25, No Lock Holes, Multigrid Bin w/ push-fit
Remix of 2x2x0·25, No Lock Holes, Multigrid Bin w/ push-fit
Remix of 2x1x0·25, No Lock Holes, Multigrid Bin w/ push-fit
Remix of 4x1x0·25, No Lock Holes, Multigrid Bin w/ push-fit
Remix of 3x2x0·25, No Lock Holes, Multigrid Bin w/ push-fit
Remix of 1x1x0·25, No Lock Holes, Multigrid Bin w/ push-fit
Plastic Stackable Storage Bins Label Tag (Aercana)
MULTIGRID like bin
Hybrid 2x2x0·25, No Lock Holes, Multigrid Bin
.png&w=3840&q=75)
Remix 1x1x0.75 - No Lock Holes - ramped - Multigrid Bin
Multipoint Bin Label
Remix of 4x2x0·5, No Lock Holes, Multigrid Bin
Multiboard - Bin Base Plate Retention Screw-Nut Insert.stl
4x2x0·5, No Lock Holes, Multigrid Bin For 23mm paints