Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2597182.

A steep ramp for really fast Hubelino compatible marble runs. Ideal as a precursor to https://www.thingiverse.com/thing:2597171

Printed successfully on Shapeways with Processed Versatile Plastic.

Duplo/Hubelino compatible steep slim marble ramp

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4115347.

My daughter wanted to design a new starter that was able to start 6 marbles at once. So I took her drawing to OpenSCAD and created it. You might want to adapt the OpenSCAD-file to fit your printer's accuracy and magnet size.

Magnet-Starter for Gravitrax

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2597171.

A looping compatible with the Hubolino marble run.
Use https://www.thingiverse.com/thing:2597182 to get the right speed.
Printed successfully on Shapeways with Processed Versatile Plastic.

Duplo/Hubelino compatible marble run looping

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4334497.

I really liked the design by makkuro, but made some changes to improve its usefullness for my tastes:
* I removed the space for the space ships, as I keep them together with starting tokens in a separate box
* the crew compartment grew larger to accommodate the aliens as well
* the cargo bin got an uneven floor to make it easier to pick up the cubes
* overall size grew a little, as there was more space in the game box
* the numbers in the credit bins now use the Amorpheus font used in the Galaxy Trucker logo and moved from the back to the bottom
* the credit boxes now have thicker walls to use up the extra space I needed for the bigger astronauts bin

I also did the whole design from the ground up to improve my OpenSCAD skills, so the code has only a passing resemblance to the original.


Galaxy Trucker Token Storage (Anniversary Edition) (Crew incl. Aliens)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3558295.

A stand for the Anker SoundCore Bluetooth speaker (which sounds a little flat if placed directly on the table) that offer space for a powerbank below and a phone in front.

### Update 2019-11-07

I added V2 which has a sturdier support, as the top broke off when the whole stand with the anker box on top was dropped

Anker SoundCore & Phone Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3099588.

Bigger air pipes than the original, because there the balloon attachment was much too small and the car rolled really slow because of the tiny exhaust holes.
As my son managed to break the printed axles, I switched to DIN 912 M4 screws with a non-threaded part below the head and created new wheels that run smoothly on them.

Ferrari 458 Balloon Car

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4056897.

The Terraforming Committee now sits in comfortable 3d chairs instead of sliding around on the board with every bump.

I included the OpenSCAD file so you can adjust the offsets if the factions sit too loose or tight in the platform

### Edit 2020-02-03

I added two variants of the platform to also restrain the delegate reserves, as suggested by [dan1033](https://www.thingiverse.com/dan1033/about)

Terraforming Mars: Turmoil - Terraforming Committee

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4585226.

My wife bought a new front basket for her bicycle, but it was very shaky especially when loaded. So I added this adapter.

Fahrradlenkerkorbabstandshalter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3006988.

Hubelino compatible marble run parts to create a vertical drop

Marble Run Drop & Receiver

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3006994.

A simple split to split or unite Hubelino compatible marble run tracks.

Duplo Marble Run Split

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4575202.

Adapter to directly connect a bowden tube from the filament enclosure (e.g. IKEA Samla) to the Anycubic i3 Mega's filament sensor.

i3 Mega Filament Sensor Adapter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4587622.

I planned to make a full insert, but I like the box art so much that I wanted to keep it visible. The dinosaurs (and barriers) live in the box now, separated by fences. The rule book is used to cover them for transport and the cards and player tokens are kept in separate bags - I didn't see any benefit in putting them in boxes once the dinos were settled and easily accessible.

Tiny Epic Dinosaurs Minimal Insert - Fences

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4022732.

Remix to fit in a round tray in our shower. Negative incline of the outer ring to only sink partways in and leave space for the water to drain.

Round Soap Dish Insert

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4561158.

To avoid wind and animals from removing the pool cover, I printed some clips to keep it in place

Poolfolienklemme

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4135483.

My son "designed" a starter that could also be inserted in a track to pause a marble until a button is pressed.

Gravitrax TunnelStarter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4592966.

A two part soap holder in the shape of a small boat. The grid is removable for cleaning.

SoapBoat

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4598459.

The Gloomhaven Monster Storage by kcwenfrank is great, but missing a lid, so I created one.

Gloomhaven Monster Storage Lids

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3151018.

For 2-part children's bicycle flag pole. The original connector broke...

Kinderfahrradfahnenstangenverbindungsstück

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3118992.

Our garden vacuum only had one handle on the pipe which made it a little cumbersome, so I created a handle in FreeCAD and fixed it with a standard steel brace for a 110mm pipe.

Laubsaugergriff (handle for garden vacuum)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4104356.

I couldn't get the arm to work, so I remodeled it with a centered hole and supports for the pin that prevents tipping

Gravitrax Pendulum Starter Arm Remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3732119.

replacement part for the tiny thing connecting the curtain rail roller to the curtain's top bar.

IKEA Vigda Connector

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

hd42

Achievements

Seedling

Debutant