CTC Replicator Dual XY Carriage Cable Chain and Filament Filter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4689195.

This CTC Replicator Dual - XY Cable Chain and Filament Filter was designed as there were no sound, adequate sized cable chains out there for the CTC Replicator Dual.

It is designed to basically bolt on - using a few of the existing nuts and bolts on your printer.

No support is required for ALL parts EXCEPT for ctc_replicator_chain_frame.stl - print this one only with supports, the rest printed perfectly fine on my CTC Replicator Dual without supports.

You need to print one of each part, except for ctc_replicator_chain_link.stl, which is the link that can be printed as many times as you need to achieve the length you desire - with my install I printed 22 links - and it is somewhat perfect. You'll want to print the filament holder pieces twice too, for both of the extruders.

The filament filters, I call canisters, are designed to simply 'plug in' to the designated holes in your new carriage cover. These canisters are designed so that there is an 'insert' piece that goes inside - this insert is designed to hold (in your creative way), whatever material you wish to use as a filter - ie, cotton bud, dish sponge, car sponge, etc.

I hope you enjoy this as much I have done designing it. I'm extremely happy with the end result, and if you find anything that may be changed to make this better, please, please, please comment! and let me know!