Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4785323.

This is a remix from https://www.thingiverse.com/thing:3366997 .
I was searching for a bowl to put chocolate easter eggs into, but could not find one I liked. I stumbled upon this Bunny and gave it an extra bowl.
If you make the bowl watertight (paint the inside with wood glue), it could serve as a plant pot too.

Edit 09/03/2021:
I chopped the item in 3 parts so it can be printed in 3 parts and glued together to be a massive 175% (i.e. 26.25cm) of the original 15cm height  

Edit 10/03/2021:
Added a v2 of the 3 parts thing. Height per part max. 15cm, total height after gluing: 30cm.

Enjoy.



Smoothed Easter Bunny with bowl/pot

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4765284.

Made an easter egg candy dish analog to the excellent Ornament Candy Dish from EmbraceNext.

Edit feb 18 2021: uploaded a version with thicker wall because original has a wall that is to thin at a certain height, although that has a nice side effect.

If you set the infill to 15 your print finishes 1 hour earlier ...

Edit feb 19 2021: uploaded v2 of this design. It has overall wall thickness of 5mm and prints another +1 hour faster

Easter egg candy dish

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3866291.

Made a quick swap for the Diamond hotend based on ProperPrinting's system. I didn't print it, but while I was at it, I made thought I can use it in the future. Fan hoder can be salvaged fro other designs on Thingiverse.

Enjoy

Diamond hotend cooler holder swap mount for ProperPrinting system

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3865014.

I thought the comment of fancywork was worth a remix. I didn't remix in fact, but it's the idea of Brand_799 and the credits go to him and ProperPrinting of course.
I made the holes 4mm in diameter.
The lever can be found here: https://www.thingiverse.com/thing:3369444

Enjoy.

tool holder wall mount for ProperPrinting with lever

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3866258.

I remixed because I like the swap system ProperPrinting made. I adapted it for the BLV mod where the X-axis is based on the MGN12H rails. It happens to be the system I'm building... .
I hope others can make benefit out of the swapsystem too now.
The remix is only the base. You can get the lever at the original project.
On my Anet AM8 I found the lever printed at 102% works best.

Enjoy.

Quick swap base ( from ProperPrinting ) to MGN12H_mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4760817.

Because my printer can print a max of 18cm in z direction and the spools I buy are bigger as normal spools I had to produce an adapter/extension to make the 30cm diameter spools fit in https://www.thingiverse.com/thing:3823334 from les_kaye. I attach them with those strong clips that hold a glass plate firmly on the bed.
Enjoy.
Update 14 feb 2021: Edited tolerances for better fit.

Spool Holder Adapter for large spools by les_kaye

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4948580.

I made this with 30% infill, but 20% might be enough.
Remixes from things 3369444, 3813267 and 4233449.
Enjoy.

Anet A8 Carriage backing plate with Properprinting quick mount

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

gyro

Achievements

Seedling

Debutant