To clip the gazebo canopy to the frame and ensure no lift off!

Gazebo Canopy Clip

Replacement window blinds weight. Pause at height (64 if 0.2 layer height) to drop in your tyre weights. I used 3 layers of a 10g and 5g weight = 45g)

Window Blinds Weight

Middle finger sign.
When printing the Middle Finger STL use pause at layer (11) to change colours, or as i prefer to do, print as 3 separate models with these positions:
base 0,0,0
text 30,0,2      z offset = 2
finger -48,0,2   z offset = 2

Middle Finger

Middle Finger.stl

Used with 2x Lawn Wine Glass Holders (https://thangs.com/mythangs/file/61640)
The holders hold the tray steady for putting your wine bottle on!

Bottle Tray

Limit Switch Covers

Coin Display Stand

I was hanging some vynil ablums in frames and needed a strong hook to take the weight comfortably.

Strong Picture Hook

...because i kept losing mine! Clips into a 5mm cable/bar.

USB Receiver Holder

Only fair to have an add-on that holds a whisky glass!
Note: If printing the whisky glass part it is designed in two parts for easy printing. Fix them together and away you go!

Whisky glass adapter for Lawn Wine Glass Holder

Whisky (top)

Stop your cables dropping down behind your desk!

Cable Holder

Punk Girl

Stan and Ollie

Fill both sides with snow, crush together for a second, carefully open and there you go! Perfect mini snowmen!

Snowman mould

Soldering Iron Stand

PLA Guide

HP Bookmark

Designed to use a bit of PLA as the hinge and also between the two boards. Note this is blank so you can deasign and add your own text.

Stand Sign

Designed to use a bit of PLA as the hinge and also between the two boards. Note this is blanks so you can deasign and add your own text.

The top edge is <0.5mm thick so placed flat aginst the wall below your drill bit it catches the drilling dust and saves you a nagging from the missus!

Drill Dust Catcher

Adapts std tripod with holder for a mobile phone.

Phone Tripod Adapter

Reel Stand with printed bearings. The bearings have a chamfer both sides to allow easy oiling, if you wish to do so. No printing supports required. Simple and works well IMO.

You will need:
1x L
1x R
2x Base
4x Bearings (carefull to print them right way up - there is a lip on one side)

Reel stand with printed bearings

Reel_Stand_Bearing.stl

DTI Holder

Trolley Hook

Ukraine flag and stand

1_Ukraine_Flag_Blue.stl

For nozzle remove/insert. Don't use when nozzle at full temperature!

6mm Nozzle key

PLA Clip

Easy print holder for wine/gin/whatever glass

Lawn Wine Glass Holder

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

gfcaim