This is a caliper holder for the #gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I store batteries elsewhere.

Enjoy!

⚡️tips@lightning.jle.vi

Gridfinity Caliper Holder

This is a caliper holder for the gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother put battery holes in it, because I store batteries elsewhere.

Enjoy!

⚡️tips@lightning.jle.vi

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5236610.

A sculpture of "healing hands" holding a ball of light, designed by request for a family member, but I figured I'd share it here. 

I suggest printing the sphere with variable layer heights. 

Healing Hands Sculpture

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5227480.

I needed a door stopper which would NOT trigger my Nuki smart lock every time the door was opened, unlike the Convex ones out there... so I designed this! It protects the Nuki from hitting the wall perfectly, while still looking nice.. and without pushing the button :) 

I'm sure it would work for most door knobs, as well!

Print in TPU, around 15-20% infill, gyroid recommended. 

Concave Door Stopper (Ideal for Nuki Door Lock)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5205926.

Attach the popular Articulating Raspberry Pi Camera Mount arm to the X-axis of your Creality Ender 3, CR-10, Geeetech A10M, and many, many more printers which use this part. 

I was shocked to see that out of all the different attachments for mounting this thing, there were none that took advantage of the big empty box covering the Endstop... so I modeled one. 

I haven't printed it yet, but will soon. 

Creality/Geeetech/Other X Endstop Mount for Articulating Arm

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5026020.

I really wanted a "honey badger" statue to celebrate Bitcoin's massive success. Unfortunately there was no honey badger available, so I designed this one. 

It's designed for dual-extruder printers, so you can print the black and the white parts on different extruders, or, I have given merged versions if you'd like - with and without the Bitcoin base. Cura will say that you have non-manifold geometry, but it will slice and print.

I printed the Bitcoin separately with silver, then printed the badger with black and white, ***including a prime tower and an ooze shield***, which saved the day.

In retrospect, I might've just printed the parts separately and glued them, but it's up to you. 


***This was my first model, and took me a ton off time to create, so if you like it, please consider sending a tip through Bitcoin (bc1q45evhsqwglffgpq8m7yhmeqcsvd3fjse38ur2y) or Lightning Network (jonathanalevi@ln.tips or @jonathanalevi on Telegram LNTXBOT!)***

Low Poly Honey Badger for Dual Extrusion

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5029111.

I really liked haitonno's design for this drill dust collector, but for some reason, it was "upside down" from what my Dyson would need. So, I flipped the button/lid around. Much better. 

I printed in 0.3 resolution, and the button broke almost immediately - so probably print it in 0.2 to be safe. 

Dyson V7 - V11 Drill Dust Collector - 180 Degrees Inverted

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5241172.

I liked the shortened and curved Filler remix, but it still had a completely unnecessary 15mm sticking out for the rolls that I use, which limited my access to things behind it... so I chopped it down even further. 

It'll now be a real tight fit on your standard spools from eSUN etc (I assume, I have yet to print it), but, will still hold them. 

Due to decreased leverage, I believe it is even stronger than other versions. 

For brackets, see the original item or any remix that suits your needs. 

Even SHORTER Filler Filament Spool System

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5262964.

I don't know about you, but I have a *lot* of filament, and at least 4-5 different rolls of black and white. Each are different materials, and they all look the same.

This makes it really tricky to see "at a glance" which roll is which, especially if they are in bags and in a cabinet. 

Thus, I have created some simple "labels" in the form of filament clips, and printed them each in colors (the colors that each filament is in my Cura / Slic3r). 

Now, I can tell from afar - or within a dark cabinet and through a bag - which filament roll is ABS, which is PETG, and which is FLEX.

Tips not necessary but always appreciated - particularly if they're Bitcoin (bc1qs6trwt00dmtkaye59mwhxg5ne83klhxgultn52) or Lightning (jonathanlevi@ln.tips)

I'm planning to make MATTE ones, too. 

*Print them face down with no supports. Brim is optional, but helps keep them down depending on how good your adhesion is*

Filament Label Clips

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5158622.

I really liked the size and shape of the IKEA Dragan bamboo boxes, but they didn't suit our new bathroom... so I designed these boxes to replace them. They're a perfect fit for the original IKEA soap dispenser, and even include drainage holes (non-removable bottom, as it's not bamboo and it's not necessary). 

Supports needed for the toothbrush holder only because of the mesh net.

Please consider sending a tip through Bitcoin (bc1q45evhsqwglffgpq8m7yhmeqcsvd3fjse38ur2y) or Lightning Network (jonathanalevi@ln.tips or @jonathanalevi on Telegram LNTXBOT!)

IKEA Dragan Replacement Boxes (Soap Dispenser & Pen / Tooth Brush Holder)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5233819.

A remix of my geometric tissue box, designed for tissue refills... save the trees, people!

Tissue Box - Plain

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5266832.

A simple "inbox" or "paper organizer" type thing for papers, magazines, etc. Designed to save space on your desk vs. lay-flat organizers, plus, it prints 100% with NO SUPPORTS!

This one is A4 sized, but you can scale it down for other paper sizes, or to the max of your printer bed, and the ends of your paper will just stick out. No sweat. 

You'll need to have your retraction settings dialed in very well, but it will print with no supports, no skirts, no rafts, no brims... It just takes a long time!

I suggest PLA at 190 degrees if possible, as other materials will string quite a bit

A4 Sized Paper Inbox / Magazine Organizer - NO SUPPORTS!

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5214699.

Store the remote for your Apple TV under the coffee table, hidden from sight, using gravity to keep it in the holder. 

Apple TV Under The Table Remote Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5246364.

A simple napkin holder, designed to be printed in place with no supports. 
I suggest printing with PETG for moderate flexibility, though as you can see from the picture, that will make it a bit more "boogery"

Can be scaled up to fit your napkins better. The default is for IKEA's 30x30cm napkins, though I wish I'd actually made it a bit bigger. I'd probably print at 125% scale if I were you.

NO SUPPORTS!

Honeycomb Napkin Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5157915.

A friend of ours made this type of sign out of metal... so I printed one ;) 

Feel free to remix and modify to have your own name!

please consider sending a tip through Bitcoin (bc1q45evhsqwglffgpq8m7yhmeqcsvd3fjse38ur2y) or Lightning Network (jonathanalevi@ln.tips or @jonathanalevi on Telegram LNTXBOT!)

Modern Door Sign

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5233813.

So, I love to buy the tissue box refills instead of the cardboard boxes since it's more eco-friendly and economical... but I haven't been able to find a good solution for the boxes that meet my design preferences - so I designed my own. 

Made to fit tissues up to 19cm long.

I am going to print it soon... my main concern is that it will collect a ton of dust inside the design, so I might just print it WITHOUT the hexes, too. I'll upload that, as well... Just for good measure. 

Geometric / Hexagonal Tissue Box / Dispenser

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4962801.

I rather liked the battery organizer tray by @ipjaeger, but it was too big to fit in my IKEA Moppe drawers, so I removed 1 row of AAA batteries to get it to fit. There's still some space on either the back or the front, which is good if you want to put some of those tiny oddities in there. 

If you're going to tip (thank you for your generosity), I do prefer Lightning Network (Bitcoin): jonathanalevi@ln.tips 

Battery Organizer for IKEA Moppe Drawer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5020690.

I really liked hamkers' Raspberry Pi camera mount with integrated cable management, but I use a webcam with a standard USB cable instead. Since it would be very tricky to run the cable "through" a channel like he does the ribbon cable, I instead removed the channels altogether, replacing them with grooves that allow you to push in a standard 3.5mm diameter USB cable. It won't be hidden at the joints, but it will at least be nice and neat. Note that the cable may not stay in by itself, it may require some adhesive depending on the thickness of the cable and the tolerance of the print.

I also modified the design to be more symmetrical since a thick side column is no longer needed to hide the ribbon cable. 

Note that this design is heavily over-engineered. If I were starting over, I would make the arms MUCH smaller to use up MUCH less material, and block less of your view of the printer. The original design is very bulky to accommodate the ribbon cable, and this one didn't need to be. On the plus side, it can support a lot of weight ;) 

Use with Hamkers' base clamp, any of the remixed Camera heads (including the one I made), and either the original base or my 1x2 base for top-mounting on Ender 3 etc. 

Tips always appreciated (particularly via Lightning Network, jonathanalevi@ln.tips) 

Enjoy. 

Webcam Mounting Arms w/ Integrated USB Cable Groove

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5231619.

Wellll... I tried about 10 times across 2 different printers and 3 different types of bed to get this thing to work, but the small little fragments on the bottom just would NOT stick down well enough to get to the bridging... so I decided to cut off the "nubs" on the bottom to give it a better chance of actually printing. Will report back with pictures if it actually works. For now, I'm live-streaming my attempts, first with the original design, then with my own: https://www.youtube.com/watch?v=EislDHbDtGw


My first row turned out lousy... so I recommend supports just for the first row of hexagons. I *might* design a saucer for it later, but no time for that now. 

Printable Geodesic Planter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5239352.

I've remixed another design I liked to improve it in the following ways:

[*] Mirrored the Allen keys for placement on a right-side wall, rather than upside down
[*] Added room for a small spray bottle or glue stick (emphasis on small due to size constraints)
[*] added a hook, either for pliers or a microfiber towel (requires support block at the base)

This is now more suitable for mounting on the wall, and should hold all the tools you need for a CR-10, Ender 3, or even a Prusa MK3. 

BTW, I know that the Allen key holes are a bloody mess, having 2 holes that merge in the middle... I don't know how to fix it at this point and I don't have the energy - plus, you don't see it and it doesn't affect usability, so I have no reason to do it. Feel free to remix and fix it. 

Enjoy :) 

Universal Wall-Mounted Tool Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5214721.

I wanted a modern and beautiful paper towel stand that would look good in my kitchen. This one does the trick. Just make sure you tell your wife not to lift it by the little pin ;)

I suggest putting sand in the base by pausing the print before the base closes. It needs some weight. 

Simple, Modern, Hexagonal Paper Towel Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5326473.

I have added "slide on" holders on my son's stroller to facilitate sliding things on and off, so I remixed the design of the slide on bracket + the design of the gimbal cup holder (from https://www.prusaprinters.org/prints/129329-universal-travel-coffee-gimbal) to create one design, allowing you to easily and quickly remove the cupholder in a modular fashion. 

Quick Release Version of Gimbal Cup Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5227477.

I LOVE my Nuki, but I HATE how people always get confused and don't know how to leave... so I made this cover which has an arrow and instructions on it. 

I printed it in white TPU, and it fits great. The original model is a bit too tight with PLA, so I figured, why risk it :) 

Supports are needed for the arrow and text (print with the flat part down). 

Nuki Skin with Arrow Instructions

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4993934.

After a couple of months of learning blender, failed prototypes for more complex "slider" cases etc, damaging my device getting it stuck in other designs, and finally accepting that I need to keep things simple, I have designed a simple "screen protector" case for the Keystone / Cobo Vault Bitcoin and cryptocurrency hardware wallet. 

The design is an exact fit, designed to be used with FLEXIBLE filament - in other words, if you want to print in PLA, you'll need to scale it up a tiny bit (I don't know how much tolerance you need).

I'd love to see improvements/remixes of this, especially a back case, adding the Keystone logo, etc... but I'm really bad at blender. 

Also, I put a lot of work into this, even if it's really simple, so I greatly appreciate tips via Bitcoin Lightning Network (*jonathanalevi@ln.tips*) or PayPal.

Thanks, enjoy, and share your makes!


Screen Protector Case for Keystone / Cobo Vault Hardware Wallet

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5247851.

The little white release button on my son's stroller broke, so I designed this replacement. 

The original is ABS, so you should print in ABS or ASA. 

Also, for some reason, it turned out a tad bit small for me, so I might recommend scaling to 101. I designed it to be 0.4mm smaller than the original, and it works great, but it is a little loose and jiggly once installed. Enjoy!

BabyZen Yoyo Replacement Switch/Button

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4946179.

I saw the ninja lock (genius), and a "rounded" aesthetic version, and a 40mm version, but nobody has made a rounded version for 40mm doors... so I made one. 

Tested on my doors (and my tike), printed with PETG at .4mm layer height, 40% infill, 60mms... Came out GREAT!

Ninja Lock - Indoor Child Lock - Rounded + 40mm door

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4995472.

I loved @hamkers' design for a camera mount more than any other on here, however, it was for Raspberry Pi cam. I bought a cheapie web-cam online instead, which has it's own tripod mount. On that, it has a 15mm ball socket (attached and tightened by screw, which is why this is a half-sphere) which allows you to move and rotate the camera... so I figured, why not connect THAT to the camera arm, instead?

This should work with a 15mm ball, but you could probably modify and mix it to work in other scenarios, too, for example, just screwing a camera to it with a standard ¼" bolt. 

I have yet to test it, but will update when I do. 



Ball socket mounting head for Cam Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5020682.

This is a remix of hamkers' cam mount, except the base is designed to use only 2 V-rails (2020), for example for the top of an Ender 3 or Geeetech A10.



2-Holed Base for Raspberry Pi CAM Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5157911.

I really liked this door hook, but I needed a 30mm one to fit into the "zero profile" doors we have. This one fits and hides the hook inside the door groove basically. 

30mm Door Hook

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

get0001