Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4746508.

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/3YZ7FWuiszC

Schwalbenschwanz Teleskop Adapter, Teile für Dobson Montierung

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5174741.

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/6ErrpzDqlXy

Geberit Toilettenspühlung

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5193194.

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/hrEPdn8445O

Anschlagwinkel, Winkel

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4583407.

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/hcswZB5tz3Q

Sägeblattführung mittels Kugellager für Bandsäge Scheppach Basa1.Für Quermutter 10mm Aussendurchmesser und M6 Schraube und Kugellager 15x6x5. 100% Infill, PETG


Saw blade guide by means of ball bearings for band saw Scheppach Basa1. For cross nut 10mm outside diameter and M6 screw and ball bearing 15x6x5. 100% infill, PETG

Saegeblattfuehrung Basa1 oben

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5022498.

Einfache Ablage für mein Dobson Teleskop. Sie besteht aus zwei Teilen, die mit drei 3x12mm Holzschrauben zusammengefügt werden. An der Montierung befestigt man sie mit einer weiteren 3x12mm Holzschraube. Die Auflagefläche für das Smartphone kann man noch mit Antirutsch-Matte auslegen.

Update: Ver2 ist 5°geneigt um ein Display drehen zu unterdrücken.

Easy storage for my Dobsonian telescope. It consists of two parts that are joined together with three 3x12mm wood screws. It is attached to the mount with another 3x12mm wood screw. The surface for the smartphone can be covered with an anti-slip mat.

Update: Ver2 is tilted 5° to suppress a display rotate.

Ablage fuer Smartphone an Dobson Montierung /Storage for smartphone on Dobsonian mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4852716.

Führung für Bosch Professional GOP 12V-28. Die M10 Gewinde müssen nachgeschnitten werden. Verwendung mit M10 Schrauben mit Teilgewinde und geeignete Federn. Ist zwar nicht so professionel wie das Teil von Festo...l, aber es ist durchaus brauchbar.



Guide for Bosch Professional GOP 12V-28. The M10 threads must be recut. Use with M10 screws with partial thread and suitable springs. It is not as professional as the part from 
Festo ...l, but it is quite useful.

Bosch Multitool Führung GOP 12V-28

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5174757.

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/5ZL2jR6IOCU

Für Servo Tester CCPM. Stromversorgung mit 18650 LiIon Zelle, USB Lademodul TP4650, Step Up Modul MTT3608 und Wippenschalter 2-pol., 19x12 mm.
For Servo Tester CCPM. Power supply with 18650 LiIon cell, USB charging module TP4650, Step Up module MTT3608 and rocker switch 2-pole, 19x12 mm

Servo Tester

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4305726.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0eS6CLPVsD4

Endkappe für Aluleiter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4569851.

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/04KJKPLF2hF

This is a remix from  "StriK3FoRC3"

It is only a bit bigger. 



Sand Tool 100mm M6

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4712300.

I just resized it to fit it to a 90 mm fan. It works great  Very nice design. I added a power supply socket as you can see at the pictures.

Fume extactor-- Lötabsaugung 90mm Fan

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4583404.

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/47pBZPJU7sW

Sägeblattführung mittels Kugellager für Bandsäge Scheppach Basa1.Für Quermutter 10mm Aussendurchmesser und M6 Schraube und Kugellager 15x6x5. 100% Infill, PETG

Saw blade guide by means of ball bearings for band saw Scheppach Basa1. For cross nut 10mm outside diameter and M6 screw and ball bearing 15x6x5. 100% infill, PETG

Saegeblattfuehrung Basa1 unten

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4873595.

2 verschiedene Größen. Einmal als Ersatz des Original Clips und einmal verlängert, sodass ein Bowdenzug und ein Kabel befestigt werden kann.

2 different sizes. Once as a replacement for the original clip and once extended so that a Bowden cable and a cable can be attached.

Bowdenzug Clip CUBE

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4884750.

Nachdem bei meiner XV 250 Virago ein Gabelprotektor brach, habe ich mir einen selbst entworfen und gedruckt. Durchmesser 60mm +- ca. 5mm. Eine Gummiunterlage (alter Schlauch) sollte unterlegt werden und dann mit einem Kabelbinder befestigen.

After a fork protector broke on my XV 250 Virago, I designed and printed one myself. Diameter 60mm + - approx. 5mm. A rubber pad (old hose) should be placed underneath and then fasten with a cable tie.

Gabel Protektor; Fork protector  60mm

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4532572.

This thing was made with Tinkercad. Edit it online https://v1.tinkercad.com/things/fix2rt8mBTU

Hobel Adapter Bosch PHO 100

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4303475.

Simple hose adapter for my bandsaw Scheppach BASA1.

Thanks, Enjoy!


Adapter for Scheppach BASA1 Bandsaw

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4532588.

This thing was made with Tinkercad. Edit it online https://v1.tinkercad.com/things/cBU2hK2F4AN

Stand Kyosho Yamaha (ca.1990)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4383181.

This thing was made with Tinkercad. Edit it online https://v1.tinkercad.com/things/5aeQhkNGKzl

Elek Rider Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4532591.

This thing was made with Tinkercad. Edit it online https://v1.tinkercad.com/things/1pKdEiorMEL

Lackierpyramide

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

fwglaser