A simple ceiling fixture done in quarters. 
Just print 2 of the quarters normally, and 2 mirrored, and use gloop to glue it together. 

The thin/flat quarter-circle can be printed in translucent or transparent filament to cut harsh light directly below.

Choice of plastic will be dictated by temperature of the light.

Voronoi Ceiling Fixture

A simple ceiling fixture done in quarters. 
Just print 2 of the quarters normally, and 2 mirrored, and use gloop to glue it together. 

Choice of plastic will be dictated by temperature of the light.

Voronoi Lampshade v2.3mf

A simple tool caddy I designed. Small spaces are sized to fit a spray bottle, or spray can such as wd40. 

The fit of the end walls in the tongue/groove protrusions is very tight, but I still used PLA gloop for the overall product. So far it's strong and stable, but time will tell

Tool Caddy

Tool Caddy v7.3mf

This is a series of finger splints I designed for rehab of injuries to finger pulleys. 
It is recommended that you seek out professional help if you have any sort of injury prior to just slapping a splint on it.
 
Sizing was done using finger gauges, and a digital caliper, so the sizes may not be perfect. I recommend printing the size above and below as well, and testing. 

The spaces in the print are meant to rest at the sides of the finger to reduce compression on the neurovascular bundle. I still recommend checking capillary refill rate every hour to be on the safe side.

Finger Pulley Splints

size 10 pulley splints.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

fullspectrumrehab

Achievements

Seedling

Debutant

Voronoi Ceiling Fixture

Tool Caddy

Finger Pulley Splints