To be able to replace the control panel or the engine you will need this tool.

Printed standing up with organic supports. I used 4 perimieters and 40 % infill. I had to use another tool to extend the handle in order to get enough force to remove the panel.

Gcode for my print with 0.35 layer height and organic support is included in the zip.

Electrolux PA91-404DG air purifier control panel tool

To be able to replace the control panel or the engine you will need this too.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4379237.

I wanted a more rigid wall holder for the [filament holder](https://www.thingiverse.com/thing:3020026), made left/right version for whatever you think fits best.

I use it for larger filament rolls, in that case use PETG and high infill for it not to twist.

wall adapter for filament holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4328343.

I loved the original design from [RANIBIZUMAB](https://www.thingiverse.com/ranibizumab/about) but I got annoyed by the model not being completely placed on the axis, so here isa remix with fusion360 files. I also did a redux that is curved for some more soil space.

Hexagonal Based Pyramid Hanging Planter remix and redux

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4307226.

Our windows have a small ventilation slot and this thing will help me put two 120 mm computerfans on them to help air flow during heatwaves (or when your working from home and have your computer run folding@home.

I split the window adapter in two parts in prusaslicer and glued it, and the big fan part was printed standning on the pins, with wide support set for build-plate support only.

Print was ok, not perfect on the inside, but life is too short for removing support, but does work!

Feel free to remix, f3d file is in there as well.

window ventilation fan duct

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4437850.

To hold a power brick under a piece of furniture. With screw holes. 

Inner measurement: 58 x 34 x 8, total width with mount point: 80

Yet Another Power Brick Holder (YAPBH)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3893012.

Looked at various over-door hooks, but they were all too big or to wide. This one is for typical Swedish wardrobe doors, 16mm wide. I haven't tried how much load they can hold, but they look pretty solid.

Wardrobe Door Hook

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4529949.

30x40 oval, 19 mm total height with a small 3 mm base.

Piedestal Mini

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3581027.

Mixing pin holder for the Moccamaster Thermos can pin. It's annoying to have it laying around rolling of the brewer, so I made this small holder in FreeCAD. First thing post!

Moccamaster mixing tube holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4517956.

For 145 mm ventilation hoses

AC vent host adapter 145 mm

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4307889.

Customized version of https://www.thingiverse.com/thing:3222967

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3222967



Very simple customisable plectrum

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4624257.

Simple size mock for the iPhone 12 max pro before I consider ordering it.

iPhone 12 Pro Max mock

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

freddux

Achievements

Seedling

Explorer