Cookie cutter of a fox.

**Print Settings**
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20%
Filament: PLA
Print with 0.4mm nozzle/0.45mm line width

Cookie Cutter: Fox

Cookie cutter of a Christmas tree.

**Print Settings**
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20%
Filament: PLA
Print with 0.4mm nozzle/0.45mm line width

Cookie Cutter: Christmas Tree

These magnetic shoe laces are printed in two pieces for each shoe. The parts are sticking together by using a small hook and a magnet.

While there are already many designs on Thingiverse most of them are quite massive in size and won't fit shoes with only little space for the laces. This is why I designed these magnetic laces which will fit better in that situation. The width of the parts when "connected" is only 18 mm. The distance required between the wholes on both sides is ~10-15 mm. Distances between two holes on one shoe side is ~20mm.

The magnet should have a diameter of 10 mm & 2 mm height.

Example: https://www.amazon.de/gp/product/B06X977K8L/

The magnet is inserted during print. You need to pause your printer before the layer at height 2.9mm starts. Printing with 0.1mm layer height is recommended.

**Print Settings**
Rafts: No
Supports: No
Resolution: 0.1mm
Infill: 20%
Filament: PLA
Notes: Printed on a Ender 3 v2. First Layer with 0.2mm height.

Magnetic Shoe Laces (slim-fit)

Cookie cutter for the logo of the "Wölflinge" at the German scout association DPSG.

**Print Settings**
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20%
Filament: PLA
Print with 0.4mm nozzle/0.45mm line width

Cookie Cutter: Wölfi of DPSG (German Scouts)

A cookie cutter of a peace dove.

**Print Settings**
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20%
Filament: PLA
Print with 0.4mm nozzle/0.45mm line width

Cookie Cutter: Peace Dove

Cookie cutter for the logo of the Jupfis a goblin/Kobold at the German scout association DPSG.

**Print Settings**
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20%
Filament: PLA
Print with 0.4mm nozzle/0.45mm line width

Cookie Cutter: Kobold of DPSG (German Scouts)

A cookie cutter of a butterfly.

**Print Settings**
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: doesn't matter
Filament: PLA
Print with 0.4mm nozzle/0.45mm line width

Cookie Cutter: Butterfly

A bracket to mount the original Creality Ender 3 laser kit onto the Ender 3 v2 print head.

This design does not require any additional screws, very simple design. You can print it without using any support, the hook is very small an should print fine.

Laser kit: https://www.creality3dofficial.com/products/creality-blue-violet-light
Printer: https://www.creality.com/en/goods-detail/ender-3-v2-3d-printer

**Print Settings**
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20%
Filament: PLA or PETG
Print with 0.4mm nozzle/0.45mm line width

Bracket for Ender 3 v2 Laser Kit

Cookie cutter for the logo of the "Biber" (a beaver) at the German scout association DPSG.

**Print Settings**
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20%
Filament: PLA

Cookie Cutter: Beaver of DPSG (German Scouts)

This is an adapter for to connect a vacuum cleaner to an Einhell TC-RS 38 E disk-type sander.

**Print Settings**
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20%
Filament: PLA or PETG
Print with 0.4mm nozzle/0.45mm line width

Vacuum Adapter for Einhell TC-RS 38 E (Disk-Type Sander)

Cookie cutter of a flower

**Print Settings**
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20%
Filament: PLA
Print with 0.4mm nozzle/0.45mm line width

Cookie Cutter: Flower

A replacement axle for the Playmobil® Off-Road SUV (6889).
Rotate by 90° to print in horizontal orientation, use support!

Use sandpaper to grind down if it does not fit 100%.
When wheel is sitting in place rotate it a bit until it runs smoothly.

DE: Ersatz Achse für Playmobil® Camp-Geländewagen (6889).

**Print Settings**
Rafts: No
Supports: No
Resolution: 0.1mm
Infill: 20%
Filament: PLA
Print with 0.4mm nozzle/0.45mm line width

Replacement Axle for Playmobil® Off-Road SUV (6889)

Cookie cutter for the logo "DPSG Lilie" at the German scout association DPSG.

**Print Settings**
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20%
Filament: PLA
Print with 0.4mm nozzle/0.45mm line width

Cookie Cutter: DPSG Lilie (German Scouts)

Cookie cutter for the logo of the "Pfadis", a palm, at the German scout association DPSG.

**Print Settings**
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20%
Filament: PLA
Print with 0.4mm nozzle/0.45mm line width


Cookie Cutter: Pfadi-Hand of DPSG (German Scouts)

Simple cookie cutter of a VW Beetle.

**Print Settings**
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20%
Filament: PLA
Print with 0.4mm nozzle/0.45mm line width

Cookie Cutter: VW Beetle (Simple)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

foxylion

Achievements

Seedling

Debutant