Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2868439.

From original:

> This hotend assembly is composed of two halves that bolt together around the E3D heatsink groove-mount head. This is then bolted to the Anycubic stock effector plate.
> Mountings for 2 x 4010 fans.

I've added Wire Strain Relief to hold wires.

Anycubic Kossel E3D v6 + Wire Strain Relief

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2832036.

Parts are to be glued together as shown in the photo.

Combined great darts holder from @waltherion with glued mounts from @Axel1969

https://www.tinkercad.com/things/lRoMvf3WnGC-10-darts-holder

10 pcs. Dart Holder for Nerf Gun

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2616521.

This is a minimalistic design Sonoff enclosure. Fits regular Sonoff and Sonoff-RF with modifications (read below). Designed to fit Sonoff modules into my ceiling light base.

Sonoff required to be slightly modified: one needs to shorten the button and solder the led lower. For Sonoff-RF you also need to lower RF module. I've just desoldered the RF module, removed plastic parts of the pin header and soldered it back.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/39QC0IW8IrG

Sonoff enclosure

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2924838.

Item made for an elementary school.
Represents one thousand in some natural way :)

Elementary school thousand cube

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4271595.

ELP camera mount adapted for the currenttly available USB camera from ELP:
https://www.aliexpress.com/item/32711091946.html
I think must fit most of ELP camera modules.

Tinkercad project: https://www.tinkercad.com/things/bz0mG9ZWIfP-elp-mount

ELP USB Camera 8M camera enclosure

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2919377.

This is a quick design to fix my dangling shoulder straps problem.

Helps to keep straps nice nd clean.

*Update 2019-07-06:* uploaded a stronger version of the buckle

Backpack strap buckle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2624368.

Clip to get cables inside 2020 profile. Designed with linear rails of Kossel Linear in mind but works for any 2020 based frame.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/6LCkzXjtasu

Kossel cable clip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2631236.

These T-nut adapters made to hold rectangular nuts from Anycubic Kossel package rotated inside the extrusion.

Version 2 is much faster to print but a bit more difficult to use.

I've used those while reassembling my Kossel Linear frame.

Rectangular T-nuts aligner

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2720395.

This is a leg for vertically standing 2020 extrusion typically seen in delta printers.

Made for my Anycubic delta. Uses side channels to hold inside the extrusion so that middle channel is free to be occupied by wiring.

Note. If printing in flex (as I've done) scale up 1-2 %.

Kossel 2020 extrusion foot

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2901081.

This is AZSMZ Mini mount for my Anycubic Kossel.

Features 2020 mount points for M4 T-nuts.

AZSMZ Mini Kossel mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3265667.

Some two color numbered bricks for a single-extruder printer.



Digit bricks

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3129835.

This is a notebook holder for vertical installation on a wall.

Designed for a colleagues MacBook Pro 15.

MacBook holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2943335.

Simple toilet paper holder for summer-house toilet :)

Toilet paper roll holder

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

foxel

Achievements

Seedling

Debutant