ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.

To legally sell PRINTED models, monthly ACTIVE membership is required through one of two available platforms below:

https://linktr.ee/flexifactory

Please help support the creative work of each 3D artist and NEVER share or sell a digital file.

3D model description

This Flexi Racing Tortoise is an articulated "mostly" print-in-place model that needs NO supports. I say "mostly" because the head, shell, and spoiler snap into place. while the optional flame should be pressed in firmy, but can more easily be removed.

Included are 7 files: *Racing Tortoise_Top *Racing Tortoise_Bottom *Racing Tortoise_Head *Racing Tortoise_Spoiler *Racing Tortoise_Fire (Removable Print 2) *4 color 3MF (colored Bambu/Prusa file) *2 color 3MF (colored Bambu/Prusa file)

Also Optimized for AMS, meaning if you are using a Bambu or Prusa with multiple colors, you should easily be able to use the fill tool for coloring. I have added a 3mf as well for convenience!

Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without supports.

Please feel free to share images of your prints on this page, I would love to see 'em.

Thank you.

P.S. If you like this design, Check out my other models.

https://thangs.com/designer/flexifactory

Affiliate link to my supplies used in the photos above can be found here: https://www.amazon.com/shop/flexifactory

*As an Amazon Associate I earn from qualifying purchases.

3D printing settings Easy Print

-No Supports (adding supports will hinder functionality) -Mostly Print-in-place (head, shell, and spoiler snap into place. while the optional flame should be pressed in firmy, but can more easily be removed.) -15% infill gyroid

• .16 layer height or better suggested -Make sure you have good adhesion. -Gradient PLA works great