Print in place version of the iconic Wienermobile with rotating wheels. Introducing the FDM (Fixum Dude Motors) print in place wienermobile. The wheels rotate right off the build plate. Prints on its side without supports. Samples printed in: Hatchbox Black, White, & Yellow PLA and FilaCube Burnt Orange PLA on the Bambu X1-Carbon at 0.2 LH, with 4 top/bottom layers, 3 perimeters and 10% gyroid infill (at least 3 perimeters recommended when used as a child's toy) FilaCube Burnt Orange PLA on Bambu X1-C in .24LH with 3 top/bottom layers, 2 perimeters & 10% gyroid infill (at least 3 perimeters recommended when used as a child's toy)