Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4600506.

Mancala Board
16x4in with 1in pockets and rounded corners, scale as desired
use any suitable beads or stones to play with a friend
v2 has shorter gaps between pockets, 12.5 x 3.75in

Mancala Board

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4624179.

Pen/Pencil holder cup
arc scale pattern
76x85mm, 3x3.3in

split and flip for upsidedown scales

Pen Holder Cup Scales

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4624223.

Pen/Pencil holder cup scales/arc shapes

about 3x3.3in

Pen/Pencil Holder cup Arc/scale

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4598948.

11x11 board with 1.25in players
scale down as desired

Nine Men's Morris

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4606149.

DIY QI Charger Phone Stand
for the green 1.3in sq qi charger boards similar to this
https://www.ebay.com/itm/115-49mm-Qi-Wireless-Charger-PCBA-Circuit-Board-With-Charging-Coil-Wireless/333707268234

no glue necessary
may need to clip the spheres to hold the board in place
qi disc can slide in the void for it
bi color led goes in the ledge to hold the phone
most pla/abs are clear enough to show the led color through the plastic

edit:
tall ver is for 6.5in tall phones
orig is for 4-5in phones
edit2:
added dxf and stl files to larger phone holder
made ledge longer for thicker phones/cases
edit3:
wide version added 3in base

DIY QI Charger Phone Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4940213.

Rack to hold 9x4 (36) AA batteries
print at 72% scale to hold AAA batteries
easy access, holds them vertical

AA/AAA (Double and Triple A)  Battery Rack/holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4808768.

wall mount for the ds4 with back buttons attached, headset wire gap included

ds4 (sony ps4) controller with back buttons wall mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4634229.

box to fit dc-dc xl4015 buck or xl6009 boost boards
screw hole on bottom, wire exits on ends
side clips to hold boards
slip together holds tight

XL4015 XL6009 buck/boost box

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4634058.

frame fits 98x115mm lithophane, scale to your needs
use with 2x 12v strips and usb dc-dc boost boards similar to these

https://www.ebay.com/itm/DC-DC-USB-2-24V-to-5-28V-2A-Boost-Step-Up-Adjustable-Regulator-Power-ModulYJCA/303670602119

use 12v 5050 non waterproof cool white led strip, 5m is around $3-4usd from china

adjust voltage to around 10v before connecting led strips, tweak voltage for brightness

scale if needed, boost boost board holder will not fit if scaled smaller

edit: had a minor flaw, boost board does not fit properly, adjusted the pocket size and made a larger hole for the usb cable to plug into it

Lithophane (flat) holder with usb boost board support

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4618481.

Ball in a Cage

Caged Ball

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4623300.

used to mount the micro sd extension to the ender 3 pro (may not fit ender3 or cr10)
with a hole to place the stock sd adapter for easy access
blocks the mini usb port, trim if you need it
https://www.ebay.com/itm/TF-Male-To-MicroSD-Female-Card-Reader-Extension-Adapter-Cable-For-Phone-GPS-TV/254682831729

easy printing, uses stock screws

Ender 3 pro micro Sd Extension Holder with usb/sd adapter holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4661782.

Trefoil cube
scaled at 7in with 1in bars, scales as desired
(assembled has a triangle box at the bottom to help lay it flat on slice softwares)

for parts, print 3 sets
(6x 4.5 unit tall, 3x 2.5 units tall, 3x 6.5 units tall)

Trefoil Cube

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4626064.

1.75mm Filament Runout Switch Holder

for microswitch with arm and no roller

wire switch, print 2 halves, adjust arm to sense filament and smash together around switch
may need glue

1.75mm filament runuot switch holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4650023.

shell for Bluetooth 5.0 MP3 Decoder Board Audio Module USB AUX TF FM Radio
similar to this one
https://www.ebay.com/itm/Bluetooth-5-0-MP3-Decoder-Board-Audio-Module-USB-AUX-TF-FM-Radio-for-Car-Auto/284075358449

i had no 2.5mm screws so i drilled it out to 3mm and use 3mm hex spacers in the mounts

Case for Bluetooth 5.0 MP3 Decoder Board Audio Module USB AUX TF FM Radio

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4677992.

print lamp at 46.47% x/y scale (100mm tall/2.2in/56mm base, then scale height as desired)
then base will fit the lamp bottom

mount for usb boost board similar to these
https://www.ebay.com/itm/5pcs-DC-DC-Micro-USB-Step-Up-Boost-Module-2-24V-IN-5-28V-Output-Power-Converter/143836596345
can adjust brightness/voltage using side hole
power boost board from micro usb hole on end

and holds 12-15v cob .9x1.6in (48x15mm)
what i had from leftover from other led lamps

Base for double twist lamp

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4769063.

Holds common chinese remote for many devices
bt/mp3/fm radio to led lighting

easy print

11-21 key ir remote holder wall mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4618574.

added pockets for usb boost board under the stand foot and for wires to be semi-hidden at the bottom fo the foot

Lithophane holder with hidden usb boost board

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4607200.

fits the ender/cr10 20x20 extrusion
used to keep track of parts or estimate time left ect..
use ti to remember numbers to 3 digits do you dont need to

edit:
thick number pole is longer with a thicker display arm

for a 4th digit exend pole arm length by 33%

parts counter/tally wheel

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4655077.

Fidget spinner for pets
uses 1x or 4x 608 bearings
22x8x7 mm (od x id x cs)
(easy to mod the dxf, each wing is separate, polar array for more or fewer)

print 6x or 2x per wing of the half spheres to make treat capsules
(22mm od sphere halves)

edit: changed bearing foot holder and cap

Cat Toy Fidget Spinner

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4682391.

Similar to others, butt with a small difference
2 designs 1 with 3 parts, other 2 halves, combine or print as desired

enjoy

Pixel Star Tree Topper

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4947635.

cage puzzle parts
makes a cube cage, print the sticks about 2-5% taller for an easier fit

print 2x each of 4 parts, and 4x of the last one
or all.stl has a complete set of 12

Cage Puzzle

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4650637.

2 chair squirrel feeder
forces squirrels to sit to eat
1/8 in. pilot hole for screw to mount corn or squirrel snack logs
2x 1/4in holes for mounting to tree or post

about 12.5in x 8.25 x 3.5 in.

similar to the design here
https://www.youtube.com/watch?v=uhy9XcJqXfc

edit:
added a single chair model

Squirrel Chair Feeder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5028451.

pointy end tward the front of the drive
uses 3mm screws for odd and standard screws for hdd

3.5in Hdd to 5.25 bay adapter

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5005891.

enjoy

Cube paperweight

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4625983.

fits 400% scale, you can scale as needed if you need to a support a dome or arc

Mushroom Lamp Top Support

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4811039.

reel handle nut plate for Shimano Triton 100g and 200g reels
holds the nut tight on the handle
m2.5x5mm screw is needed to hold the nut plate on the handle

TGT0213 + TGT0128 - Shimano Handle Nut Plate

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4598232.

hobbico dromida futaba s3114 servo mount
to fit a futaba s3114 servo in the dromida 1:18 4wd sc truck

hobbico dromida futaba s3114 servo mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4665483.

hang ds4 or xbox one/s/x controllers from a wll
fast prints, 3-4hrs
.2in screw holes with .5in countersink in xbone holder

tweaked and modded from many other model parts
they are not exactly correct, but hold the controllers snug

DS4 and Xbone Controller wall mounts

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4598240.

Nintendo 64 logo for keychain with ring holes
was drawn at 3in, scale to 25-33% for a much smaller version, or print at 100% for a desktop cube

N64 Cube with keychain hole

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

ffejrxx