Halloween

Star Wars

Batman

Golf

PezLiz

B1G_Jano

One of the best compliments your little girl can give you is, "Ah, it's so cute!" My second attempt at using Forms in Fusion. I'm not much of an artist, but I do like the quirkiness of this guy.

Each part is modeled and uploaded separately, to save you from the pain of "painting." I do my best to create Models that don't need Supports; however, this one will need some. I used Tree (auto) and I'm proving a screenshot from within Bambu Studio.

I chose to use Polymaker ASA for this print, because he's going to hang out by the pool!
Body = Yellow
Eyes = White
Pupils = Black
Wings = Black
Water = Polymaker Teal

Ducky Ridin Waves

01 Ducky Ridin Waves_Body.stl

One Piece Rocket: Ignite your imagination and tailor its appearance with colors and materials that resonate with your style! 

* Standing 130mm tall, this model is perfectly proportioned to be scaled down to a petite 30mm or up to the maximum capacity of your printer's volume
* Crafted for a stunning display, this design shines brightest when created with vibrant, multi-colored filaments
* Add a shimmering effect with the use of Luminous or Glow in the Dark filaments to make it stand out
* Launch it skywards and watch it rebound "gracefully" upon descent with TPU’s flexibility 
* Showcase it outdoors and rely on ASA’s robustness to maintain its pristine condition

The One Piece Rocket is yours to download at no cost! Interested in commercializing your prints? Explore the benefits of our Thangs Membership.

One Piece Rocket

Rocket_One Piece.stl

Last year's Wand_Easter Egg with Wavy Decorations has been updated to include the Wavy Decorations on their own for easy multi-color selection!

The kids can run around the yard with their Wand or you can "plant" them in the ground as props 🤘🤘

For printers without multi-material capabilities, join all the parts in your slicer. These Eggs look great in a dual/tri-color filament and Glow in the Dark. The Egg is hollow, allowing for a lighter weight. The shaft was modeled so that it continues on the inside for strength but is cutout on the bottom so the Egg can fully be one color.

Size: 300mm x 55mm 30mm; fits on a Bambu when rotated 45°
Material: PLA/Any
Nozzle: 0.40
Layer Height: 0.20
Infill: 9
Walls/Shell Layers: 3
Supports: No

Wand_Easter Egg with Wavy Decorations

Wand_Easter Egg with Wavy Decorations_Egg.stl

Last year's Easter Egg with Wavy Decorations has been updated to include the Wavy Decorations on their own for easy multi-color selection! 

These are great for Easter Egg Hunts! If you print them in ASA (ABS, PETG) then you won't have to worry if you don't find them all! 

For printers without multi-material capabilities use *Shell v4. These Eggs look great in a dual/tri-color filament and even better when you scale them up.

For multi-material printers use the Egg + *v2_Waves.

Size: 75mm x 50mm
Material: ASA, PLA
Nozzle: 0.40
Layer Height: 0.20
Infill: 9
Walls/Shell Layers: 3
Supports: Not needed, but up to you; if you use something like Seam > Back you may want to support that bottom area until the first Wave

Easter Egg with Wavy Decorations

Easter Egg with Wavy Decorations_Shell v4.stl

My first attempt at an articulated/flexi model! It's a Broken Egg, which if perfect for Easter 🐰🥚 Looks great as a single-color or as a multi-color print. If you think you'll lose some in the Easter Egg Hunt, print them in ASA, ABS, or PETG 🤘🤘

I'm uploading the parts as individuals to allow for ease of selection with multi-color. If you're doing single color, your slicer should allow for combining the four parts into one.

Size: 75mm x 60mm
Material: ASA, PLA
Nozzle: 0.40
Layer Height: 0.20
Infil: 9% Gyriod
Walls/Shell Layers: 3

Model Tolerance: 0.30mm, perfect on my Bambu P1S but tight on my CR-10S; I'm more than happy to post more tolerance options!

Flexi Broken Egg

Flexi Broken Egg_Quarters 01_Tol 0.30.stl

Walking by my neighbor's house and seeing their red and yellow Hibiscus, I thought, “Those would make great HueForge prints!” I snapped a couple pictures on my phone and now we have beautiful prints! 

Bambu P1S
0.4mm Hardened Steel Nozzle
0.04 Layer Height

Swap Instructions:
	Start with Polymaker PolyTerra Black
	At layer #10 (0.52mm) swap to Polymaker PolyLite Orange
	At layer #17 (0.8mm) swap to MatterHackers Build PLA Yellow
	At layer #19 (0.88mm) swap to PM PL Silk Yellow
	At layer #23 (1.04mm) swap to PM PT White for the rest

Yellow Hibiscus_Front_210x228 v2.stl

Walking by my neighbor's house and seeing their red and yellow Hibiscus, I thought, “Those would make great HueForge prints!” I snapped a couple pictures on my phone and now we have beautiful prints!

Bambu P1S
0.4mm Hardened Steel Nozzle
0.04 Layer Height

Swap Instructions:
	Start with Black
	At layer #8 (0.44mm) swap to Polymaker Galaxy Blue
	At layer #10 (0.52mm) swap to PM Army Red
	At layer #14 (0.68mm) swap to MatterHackers Red
	At layer #18 (0.84mm) swap to PM Army Red
	At layer #22 (1mm) swap to MH Red
	At layer #24 (1.08mm) swap to MH Yellow
	At layer #37 (1.6mm) swap to MH Pink
	At layer #40 (1.72mm) swap to PM White for the rest

Red Hibiscus v01_Front_210x208.stl

I grew up on my Mom's 8-tracks and 45s. That yellow plastic adapter, to me, is so Iconic! This was a really fun Model to create and to those of you who Download/Make it, You ROCK 🤘🤘

Two versions:
Originally designed for 0.5mm Layer Height, but I've also added one for a 0.2mm Layer Height

Rose_45RPM Adapter_1.5 Center Hole_99mm High
> Vase Mode
> Suggest a 0.5mm Layer Height
> 0 Top
> 3 Bottom x 0.5 LH = 1.5
> 1 Perimeter

Rose_45RPM Adapter_0.6 Center Hole_99mm High
> Vase Mode
> Suggest a 0.2mm Layer Height
> 0 Top
> 3 Bottom x 0.2 LH = 0.6
> 1 Perimeter

Stem_45RPM Adapter_375mm High
> Suggest a 0.2mm Layer Height
> 3 Top
> 3 Bottom
> 6 Perimeter
> 0% Infill

Retro Rose_45 RPM Adapter

Rose_45RPM Adapter_1.5 Center Hole_99mm High.stl

Print for Halloween or for a lover of Spiders. I printed some in ASA, so I can keep them outdoors! 

Print multiple versions, no mouth, mouth, and mouth with fangs. 

Modeled with an AMS in mind, each color is its own model set.

Printed on a Bambu P1S
0.4mm Nozzle
0.2mm Layer Height

Spider on a Web

Spider.stl

Display your Signed Hockey Pucks from your favorite Stanley Cup winning Hockey Players 🤘🤘

Modeled with an AMS in mind, each color is its own model set.

Printed on a Bambu P1S
0.4mm Nozzle
0.2mm Layer Height

Hockey Puck Display_Stanley Cup

Puck Holder_Stanley Cup_Black.stl

Let's Go Pens!!! Display your Signed Hockey Pucks from the 5x Stanley Cup winning Pittsburgh Penguins 🤘🤘

Modeled with an AMS in mind, each color is its own model set.

Printed on a Bambu P1S
0.4mm Nozzle
0.2mm Layer Height

Hockey Puck Display_Pittsburgh Penguins

Puck Holder_Pens_Black.stl

I enjoy the art of modeling Roses with a unique design in the center. So, I couldn't think of a better way to show off my love for Heavy Metal music than to incorporate it into a beautiful Rose 🤘🤘

Print some in ASA and leave em in the garden! Use Dual/Tri Color and change the rotation for different looks with the same color combo or Print as one piece with a Rainbow filament to retain the gradation! 

Rose_Horns Up v2.stl
> Vase Mode
> Suggest a 0.5mm Layer Height
> 0 Top
> 3 Bottom
> 1 Perimeter

Stem_Horns Up v2_2.stl
> 0.5mm Layer Height
> 3 Top 
> 3 Bottom
> 3 Perimeters
> Glue Rose to Stem

One piece Print

Rose_Horns Up v2.stl + Stem_Horns Up v2_2.stl
* Will not fit at full height on something like a Bambu
> I used the above two Profiles in Simplify3D to automatically switch from Vase Mode for the Rose to standard for the Stem
> Worked well and created a solid bond between the two parts
> Feel free to ask for specifics if you're interested in trying this!

***

I love to see Makes, so please tag me:
Twitter = fatboy1271
Instagram = reverend_fat71

Rose_Horns Up

Rose_Horns Up v2.stl

This started out as an Owl model, but quickly turned into a Frog 😂 My first attempt at modeling an animal and also using Fusion 360 Forms. I'm probably most proud of how the feet came out!

I'm uploaded two sizes: 90mm tall and 180mm tall. If you scale smaller than 90mm tall, you may have issues with the feet being too small, but if you do go smaller, I'd love to see pics!

1) If you print one, or more, please post your Make! I love seeing what filaments people use🤘🤘
2) If you have any issues, please let me know so that I can fix them!

Smiling Frog

Smiling Frog_180mm.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

fatboy1271

Achievements

Novice Maker

Seedling

Voyager

Debutant