ifixitMount Multiboard
121 downloads · 2 years ago · Open case mount for the iFixit toolset. I modified this to fit the multiboard system.
I printed wit
Open case mount for the iFixit toolset. I modified this to fit the multiboard system.
I printed without support. PLA. 15%
Original model: https://www.printables.com/model/501548-honeycomb-storage-wall-ifixit-mako-tool-mount-open
8x8 MU - Center Grid Interfitted - MultiBoard Octagon Plate
6.25 mm - Quad Offset Snaps (DS Part A)
6.25 mm - Offset Snap (DS Part A)
6.25 mm - Dual Offset Snaps (DS Part A)
Raised Dual Snap (DS Part B)
Raised Quad Snap (DS Part B)
Raised Double-Sided Snap (DS Part B)
9x9 MU - Center Grid Interfitted - MultiBoard Octagon Plate
Raised Multiboard Snap
Offset Snaps Removal Tool
.jpg&w=3840&q=75)
Multiboard Demo Pack (FREE)
8x8 Multiboard Corner Legacy Tile
Ironing Stack - Test Print - Key Chain
8x8 Multiboard Side Legacy Tile
%2520in%2520aciton%25202.png&w=3840&q=75)
Snap (DS Part B)
6x6 MU - Center Grid Interfitted - MultiBoard Octagon Plate
20 mm, Pegboard Click Hook
4x4 MU - Center Grid Interfitted - MultiBoard Octagon Plate
Raised Moderate Weight-Bearing Snap
Looking at the STL file, looks to be a Push Fit, but looking at your image, you've got snaps on it... I'm not seeing the ability to use threaded bolt locks to keep the snap attached to your model?