Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5441160.

Works with Model S / X adapter with the flange!

Haven't seen a design for the flange yet, and was requested to make one. I ended up with a universal design that works for both adapter styles.

Usage is slightly different with the flange adapter, see the steps image. First slide on adapter all the way back, then plug in J1772 charger, then slide back into position and plug into car. As a bonus, you can rotate it and leave attached securely to the adapter (only works with flange).

Also works with Model 3 / Y, though my [earlier design](https://www.thingiverse.com/thing:5407494) uses less material and is just as effective.

This is an original design and is not permitted for commercial sales without explicit permission. I may sell on Etsy soon.

Edit: Had to modify slightly to allow clearance for the car, so no room for Tesla logo but otherwise works great and verified with 2017 Tesla Model S w/ flange adapter.

Tesla J1772 Charger Adapter Lock - Universal (S 3 X Y w/ flange!)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4930414.

Designed a simple hook to attach to the side of an Elfa System closet rack (from Container Store). You can put many of these on one shelf if needed.

No supports needed, and I've been printing at high speed which seems to be strong enough.

Elfa Closet Hook (Container Store)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2551900.

Couldn't find a simple holder for vape cartridges out there.

This holds the narrower 10mm cartridges (510 thread), with 12mm openings for some extra room.

Available as 2-4 columns with convenient labels for Sativa, Hybrid, Indica and CBD!

If you also use Pax Era pods, you might like: 
https://www.thingiverse.com/thing:3155296

Fully customizable design, based on Weicocu's remix, available at:
https://www.thingiverse.com/thing:5630090

---

**Available on Etsy!**
*This design has been authorized for use on Etsy by the following seller. Any other use of my design is without permission and in violation of the Creative Commons license and Thingiverse TOS. All it takes is a quick request, and attribution! [More info](https://www.makerbot.com/stories/news/thingiverse-creative-commons-licenses-explained/)*
https://www.etsy.com/shop/Designz3D

510 Vape Cartridge Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4586593.

Edit: Added a new model! Several improvements: 
- Flat bottom so that it stands on its own
- Grooves inside to improve friction fit
- Charging hole on bottom

I got the small Tile Sticker to help me from losing my Pax, though the Pax is curved so doesn't have a good surface to stick on.

This attachment fits both the Pax Era and Pax Era Pro and holds the Tile Sticker securely to it.

Everything is a friction fit, so you don't need to use the sticker on the Tile Sticker.

There's two models, one which fully surrounds the tile and another slim one where the Tile sticks out. Slim seems secure enough and is a much better feel.

*The preview shows a solid wall in the middle, though when slicing this gets removed for being so thin.*

Pax Era / Pro Tile Sticker Attachment

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5630090.

Remixing a remix of my own creation!

I've never made an SCAD file or customizer-compatible-file before, and thought the parametric design by Weicocu was pretty cool, but bummer that it was missing labels.

To get some experience with SCAD, I modified his file to add label support.

Uploading essentially my original 4x5 design with "SHIC" labels, but fully customizable!

My original: https://www.thingiverse.com/thing:2551900
Weicocu's remix: https://www.thingiverse.com/thing:4948078

510 Vape Cartridge Stand - Parametric w/ Labels

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5775415.

Poop bag holder attachment, fits on the strap that holds my bag dispenser. Slide in the bag and it holds great, and has a very small footprint.

If anyone has different dimensions on theirs, let me know and I can try to make one that fits.

Dog Poop Bag Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3155296.

Couldn't find a simple holder for pax era pods out there. This is better than leaving them scattered about or horizontal.

It holds 3 pods, no markings. 

This compliments my 510 thread vape cartridge stand here: https://www.thingiverse.com/thing:2551900

Pax Era Pod Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3280637.

Simple stand to hold two Sonicare toothbrush heads upright.

Sonicare Toothbrush Head Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5407494.

The original is too loose and can easily be unplugged when I tried. The gap between the car allows it to wiggle enough to unlock, even with the 8mm deeper design.

This is redesigned from scratch and seems to hold well. It includes the thinner latch ring area, a request on the original, and the Tesla logo.

Comment if it works better for you, or if you have any other ideas. I've tried it on ChargePoint, Clipper Creek and Tesla HPWC J1772 chargers.

By request, I uploaded a model that is a *tight* fit, which is intended to stay on the adapter semi-permanantly. It's a very tight fit.

Note: This works only on Model 3 / Y adapter with no flange. If you have the flange adapter for Model S / X, use my [universal design](https://www.thingiverse.com/thing:5441160).

Tesla J1772 Charger Adapter Lock - Snug Fit

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5516660.

Found something like this for sale online but no model to print so I designed one.

This holds the slimmer FasTrak Flex (or CAV) on roof glass using the trim by the mirror.

May work for other cars besides Tesla if the trim has a gap in it. For Tesla it should work for Model 3 and Y at least, probably others.

FasTrak Flex Clip / Holder for Tesla & Others

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5775408.

Accidentally got tomato pods for my small Aerogarden, not realizing a trellis is required for them to grow properly. There is no trellis for the smaller models, so I designed one that can be used for individual pods, and stacks as they grow.

Aerogarden Single Trellis

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4563291.

I designed this to hold a Eufy 2 wireless camera up against my standard metal wire dog crate at an angle.

You'll want to print with the holders pointing up, low quality is fine and no supports are necessary.

Eufy Camera Dog Crate Mount / Holder

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

epheterson