Simba Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x170.82mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:

PLA Black Transmission Distance: 0.3 PLA Brown Transmission Distance: 7.2 PLA Red Transmission Distance: 6.3 PLA Yellow Transmission Distance: 2 PLA sand Transmission Distance: 2 PLA White Transmission Distance: 5

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Brown At layer #16 (1.36mm) swap to Red At layer #18 (1.52mm) swap to Yellow At layer #20 (1.68mm) swap to sand At layer #21 (1.76mm) swap to White for the rest.