IMPORTANT THIS PRINT IS LARGE AND WONT FIT ON ALL PRINTERS!!!! Its dimensions are 227mm tall (z) X 175mm (x) X 141mm (y) In its current sizing it does not fit on the regular prusa without cutting off the top of the tallest piece. This fit fine on my Bambu P1S. You can always use the perform cut button and glue that bit back on later. If you have a smaller machine like an A1 mini you will also have to use the "perform cut" button to cut it a little further down to get it to fit, but again can glue the piece back at the end. Not ideal, but it's one way to get it to fit on your machine.

This print needs supports and is meant for multi color machines. This cannot be printed in its parts and glued together Also this is a long print in multi color so be prepared.

(Single color files has now been added, be sure to hit download all to get all files)

I do apologize to those with smaller machines for the large size but castles seem to take up a lot of real estate in order to get in all the details. (I have another totally different Christmas design in the works that should be more smaller printer friendly)

As always, if you have questions feel free to reach out. Make sure to hit "download all" to get all the files provided. There should be 2, one for the icing and one for the gingerbread.

Please do not sell or distribute files. If you wish to sell the finished product please make sure you are a current active member!!! If you discontinue memebership, you also forfeit the right to sell the finished products.