Dispenser module for hydroponic tower.  
Modifications:
8 mm barb for my hose size.
Blocked inner water holes to guide water where i want it. 

Original: https://www.thingiverse.com/thing:3405964

Dispenser_Module_Internal v7.stl

I remixed it again.  Now it is a clip in, no threads! 

Hydroponic planting module netcup holder remixed again

planting module body.stl

This is a remix of the redux version of the netcup.  It has a threaded retainer to hold in 2 inch netcups.  I am making a clip in version as well, apparently I'm bad at threads. (these work, but the threads print badly) 

Threaded remix of Hydroponic netcup.

Standard pot threaded body.stl

This is a wall mount for the eve air quality sensor.  
It uses a single #6 drywall screw to mount, though VHB double sided tape should be adequate.

Eve Air Quality Sensor - Wall Mount

eve holder v2.stl

An extended version of the Voron 2.4 spool holder.  Needed this for the larger polymaker 3kg spool i bought. 

spool_holder v3.stl

This is a remix of the planting module for a hydroponic tower.  I first removed the net part, opting to use off the shelf 2 inch net cups.  Then, the handle portion seemed to be a waste of material.  I removed most of it and knurled the rest for grip. 

Modular Hydroponic Tower Garden by BoundaryCondition: https://www.thingiverse.com/thing:3405964

I am not great at most of this, so It's a bit hacky and the knurling sucks.  f3d available on request. 

Hydroponic netcup redux for Tower Garden

Modification of a modification.  Holds 2" net cups in a 3d printed hydroponics tower. 

I am going to revise this as there are rough edges that make for bad print results. 

Net_Cup_Holder_OBJ v2.stl

Dispenser module for Hydroponic tower remix. Remixed for 8mm tube. 

Dispenser_Module_Internal_8mm.stl

Hydro tower Lid with lattice integrated.  I use it mostly to keep the bug netting from resting on the growing plants. 

Lid_without_holes_with_lattice.stl

Built around an esp32 C3FH4 RGB board.
I wanted something to hold the board, allow usb-c connection and to have a clear top.

The clear top is up to you, but i used vase mode on some transparent PLA.  

Led Cube - C3FH4 RGB

Led cube.stl

The hydroponic grow box i bought years ago uses deeper than standard cups.  This holds a rockwool cube at the proper depth to keep roots in the water.  

Hydroponic growcube holder v2.stl

I have a hydroponic grow box I've been using for lettuce and herbs for a few years now.   Decided to try for some cumbers and cantaloupe, so i moved it outside.  Both of these plants are climbers, and this box is just not suited for that. 

To make this you will need a printer with a rather large print area.  M4 screws of your choosing for the supports.  4 36inch long 3/4" dowel rods.  And this old hydro box.  https://smile.amazon.com/gp/product/B01MS6U1UF

Lattice for hydro grow box.

grow_lattice_corner.stl

Various corner braces for a garden i built. 

Brace Right left.stl

Brace Right Front.stl

Various corner braces for a garden i built.

even more brace v1.stl

Holds 4 145mm solar cells.  You may need to scale this ever so slightly if your cells at oversize as mine were.  Print in ABS or equivalent, the sun is warm!

145x145 v3.stl

Made doors for my covered/raised garden bed.  They were flimsy and the corner braces i made from wood cracked.  I printed a design hoping for much improved rigidity and it worked! 

Wood used was "1x2" which is commonly actually .75x1.5.  

As this is outdoor, i printed them in ABS with an .6 nozzle at .4 layer height.  They really want to pull off the bed even in a closed insulated chamber.   Might round the corners if someone asks as this should reduce that tendency. 

Robust corner brace for simple frame

corner brace v3.stl

This model is for housing an esp32 - d1 mini and a 1.3 oled.  I'll be updating it as needed, pretty fiddly at the moment. (legs are glue on will fix later.)

esp32 mini, 1.3 oled

1.3 OLED Front v5.stl

Solar cell Adapter for garden lights.  The diameter is 58mm and it was designed for a 40mm replacement cell. 

Solar light cell adapter v2.stl

These pin the floor of a voron in place more effectively.  Better abs chamber temps are possible this way.

Voron Floor Panel Holders

Top cover for voron floor plate to keep it in place and prevent warping. 

voron_floor_cover.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

docah

Achievements

Seedling

Trailblazer

Debutant