Remix of "I Love 3D Printing" Remixing Mug by DaveMakesStuff.

Will the mug be watertight? Only if you are not greedy!

In this remix I added an internal channel that will work as a pythagorean siphon.
If you fill the mug over the line the liquid inside the mug will spill from the bottom.

This is why I love 3d printing: hidden channels like this would be impossible to manufacture by conventional means.

Warning:  make sure not to use any support in the inside channel.

When you print this make sure to comment if the print was a success or if you had any problem that I can fix.

Greed Mug: Remix of "I Love 3D Printing" Remixing Mug

This file is intended for remixing! Download it, import into your favourite mesh editing software and do as much damage to it as you can! 

Once you’re ready to print why not test the limits of your printer? Crank up the speed, change the extrusion rate, what other parameters can you play with?

No matter what you do, just hit print and walk away! However it turns out will be the perfect, if not ironic, testament to your love of 3D printing! It will also a great gag gift for the other 3D printing enthusiasts in your life.

The model here demonstrates modifications that simulate clogged nozzles, layer shifts, and poor layer adhesion: https://social.thangs.com/m/491441 . 

See here for video of modified version: https://youtu.be/FJbw00gRW_4 


"I Love 3D Printing" Remixing Mug

I Love Printing Mug_Greedy_Remix.stl

I Love Printing Mug_Greedy_Remix.stp

#custom for Household category
Here is a small item that could make your kitchen sink cleaner and tidier. 
The inside measure are: 98x28x40 [mm]
If you want me to make any custom measure I'll add them, comment below or dm at my social (link in bio).
The sponge holder can free stand or can be used paired with a suction cup and be hung near the kitchen sink.
The design feature a lightweight design and water drainage that helps to dry the sponge.

**attention**
3d printing is not food-grade and layer lines can home bacteria, if you want to use this design consider using a food-grade coating to make the product safe.
I will not be responsible for any damage or health problem caused by improper use.



Sponge Holder with water drainage

#custom for Household category
Here is a small item that could make your kitchen sink cleaner and tidier. 
The sponge holder can free stand or can be used paired with a suction cup and be hung near the kitchen sink.
The design feature a lightweight design and water drainage that helps to dry the sponge.

**attention**
3d printing is not food-grade and layer lines can home bacteria, if you want to use this design consider using a food-grade coating to make the product safe.
I will not be responsible for any damage or health problem caused by improper use.



**DO NOT DOWLOAND THIS FILE, IT ISN'T THE LATEST VERSION : USE THIS https://thangs.com/dmEngineering/Squid-Game-Mask-Sliding-STLs-32520**

Guard Mask with the sliding action.

These STPs are an evolution of the mask here: https://thangs.com/dmEngineering/Squid-Game-Mask-28341

Top and forehead band are the same.

**I could only print at 1/3 of scale with my mars 2 mono to test the sliding action, so if anyone is going to print it let me know here in the comments or dm me @ https://www.instagram.com/dmengineering.official/**

Instructions Soon

Squid Game Mask Sliding Action STP

Product1

Squid_Game_Mask_Bottom_sliding

Squid_Game_Mask_Bottom_slider

Squid_Game_Mask_Top

Guard Mask with the sliding action.

These STL are an evolution of the mask here:https://thangs.com/dmEngineering/Squid-Game-Mask-STLs-28342

Top and forehead band are the same.

I could only print at 1/3 of scale with my mars 2 mono to test the sliding action, so if anyone is going to print it let me know here in the comments or dm me @ https://www.instagram.com/dmengineering.official/

Instructions Soon


Squid Game Mask Sliding STLs

Squid_Game_Mask_Bottom_sliding.stl

#HalloWearable #HalloWearables
__________________________________________________
**I've uploaded and update here: https://thangs.com/dmEngineering/Squid-Game-Mask-Sliding-STLs-32520
This version has the sliding action.**
__________________________________________________
For the STP Assebly go here: https://thangs.com/dmEngineering/Squid-Game-Mask-28341

Here is the guard's mask from Squid Game.
The mask is divided into pieces for better printability.

Here are the steps to make it.

1) print all the 3 parts
2) if you didn't print the parts black, spray paint them with black primer
3) Glue Top to Bottom using the groove to align the parts
4) Glue the forehead band into the inward slots of Top
5) If you printed the forehead band in PLA you can use a hot air gun to make the part more comfortable.
6) use masking tape and white paint to make triangle a square (a circle is much harder)
7) tie an elastic band to one of the outward slots of top.
8) test fit the mask and tie the other end of the band to the other slot to have a firm but comfortable fit.
9) Wear the mask with a red hoodie and enjoy your cool and affordable costume.

If you have doubt comment here.

Squid Game Mask STLs

Squid_Game_Mask_Top.stl

#HalloWearable #HalloWearables
________________________________________________
**I've uploaded and update here: https://thangs.com/dmEngineering/Product1-32521
This version has the sliding action.**
_______________________________________________
For the STLs go here: https://thangs.com/dmEngineering/Squid-Game-Mask-28342

Here is the guard's mask from Squid Game.
The mask is divided into pieces for better printability.

Here are the steps to make it.

1) print all the 3 parts
2) if you didn't print the parts black, spray paint them with black primer
3) Glue Top to Bottom using the groove to align the parts
4) Glue the forehead band into the inward slots of Top
5) If you printed the forehead band in PLA you can use a hot air gun to make the part more comfortable.
6) use masking tape and white paint to make triangle a square (a circle is much harder)
7) tie an elastic band to one of the outward slots of top.
8) test fit the mask and tie the other end of the band to the other slot to have a firm but comfortable fit.
9) Wear the mask with a red hoodie and enjoy your cool and affordable costume.

If you have doubt comment here.

Squid Game Mask

ForeHead band

Cover for Speaker : Seas Prestige H1456-08ER19RNX
For the design competion: #3DPNSpeakerCover


Voronoi speaker Cover #3DPNSpeakerCover

Decorative Voron Basket

Designed to throw tennis balls further.
Require assembly, use glue to join the handle to the main body, if you would prefer a screw join comment or feel free to modify the files yourself.
Uploaded 3 main bodies with different heights in order to be printed by most printers.
The longer the main body is, the further the ball will go.
#3dPetPrint


Far Ball Thrower

Ball_Far_Thrower_assembled.stp

Here are 2 files:
-stp: wich you can modify with your favourite cad program or print as it is
-SLDPRT: wich you can modify with Solidworks 2019.
Feel free to comment
#3DPetPrint

Cat Litter Box Scoop #3DPetPrint

Litter_box_scoop.STEP

Voron Vase #Thangs100K

Here are two files:
-Parametric solidpart which you can customize with Solidworks 2019 
-Plain .step in which you can add your text with your favorite Cad.
#3dPetPrint

Customizable Dog's Tag

Dog_Tag_Parametric.SLDPRT

Belt hanger Shell #Thangs100K

Belt hanger Solid #Thangs100k

Belt_hanger_Solid.stl

Drill bits holder that retains bits by friction by an elastic element.
#Thangs100K

Self retaining drill bits holder #Thangs100K

Drill bits holder that retains bits by friction by an elastic element.


Phone stand (30°&45°) #Thangs100K

Mechanical Engineer & 3D modeling enthusiast
I have a Mars 2 mono, and I'm trying to make dimensional accurate parts from it
https://twitter.com/Dario18755551
https://www.instagram.com/dmengineering.official/
https://vm.tiktok.com/ZM8u1ao11/


Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow